Complete removal of heavy metal from complex heavy-metal wastewater (CHMW) requires advanced technology. This study investigated the feasibility of a multi-staged ferrite process (MSFP) for treating CHMW, containing Cd, Cu, Pb, Cr, Zn, Ag, Hg, Ni, Sn and Mn. Our experimental results showed that most of the supernatants after conventional single-step ferrite process could conform to the effluent...

The influence of various cations ranging from alkali metals to transition metals according to the periodic table were discussed. The ferrites used were Ni ferrite, Mg ferrite and Zn ferrite having different cation distributions in the spinel lattice. Cations having appropriate ionic radii and valencies are soluble in ferrite. Several additives formed other phase in addition to the spinel phase....

Co-Zn ferrite and BaM ferrite films were deposited on silicon wafer disks with thermally oxidized surface layer without annealing process, and their readlwrite characteristics in contact mode have been investigated by using a MIG and Mn-Zn ferrite head with gap length of 0.2-0.4 pm. The highest linear recording density D50 of Co-Zn ferrite and Ba ferrite films were 105 and 190 WRPI, respectivel...

The reaction mechanism for conversion of MnO nanoparticles to Mn-ferrite nanoparticles was studied, which involved sequential consumption of MnO and the growth of ferrite. The method could be applied to other ferrite nanoparticles including cobalt ferrite.

the effects of isothermal aging at temperatures between 550-850 ?c for durations of 1-100 h on microstructure, tensile properties, and impact fracture behavior of 316l austenitic stainless steel weld metal have been investigated. for this purpose, various techniques including metallographic observations, measurement of ferrite content using ferritscope, and fractographic investigations have bee...

High strength steels Q690+Q550 were welded using three different welding wires without preheating by gas shielded arc welding process. Microstructural characteristics of weld metals and nucleation mechanism of acicular ferrite were investigated by means of scanning electron microscope (SEM), energy dispersive spectrum (EDS) and transmission electron microscope (TEM). The straight Y-groove test ...

Theoretical analysis has been carried out to establish the heat transport phenomenon of six different ferromagnetic MnZnFe2O4-C2H6O2 (manganese zinc ferrite-ethylene glycol), NiZnFe2O4-C2H6O2 (Nickel zinc ferrite-ethylene glycol), Fe2O4-C2H6O2 (magnetite ferrite-ethylene glycol), NiZnFe2O4-H2O (Nickel zinc ferrite-water), MnZnFe2O4-H2O (manganese zinc ferrite-water), and Fe2O4-H2O (magnetite fe...

The concept of a cyclotron-resonance maser (CRM) with a ferrite loading incorporated in its waveguide is proposed. The CRM interaction occurs between the rotating electron beam and the em wave propagating along a longitudinally magnetized ferrite medium. The ferrite anisotropic permeability resembles the CRM susceptibility in many aspects, and particularly in their similar response to the axial...

The following nomenclature is used in this Chapter: a allotriomorphic ferrite aa acicular ferrite a w Widmanstatten ferrite ~ delta-ferrite !:i.0' increment in yield stress I austenite € true strain € true average strain €~ true plastic strain in softer phase of a dual-phase steel €~I true plastic strain in harder phase of a dual-phase steel €UTS true strain at ultimate tensile stress €y true s...