a r t i c l e i n f o The adhesion of Pt to carbon surfaces is an important technological consideration in proton exchange membrane fuel cells (PEMFCs). Thin films of Au, Ti and Cr were deposited on graphite, non-hydrogenated diamond-like carbon (NH-DLC) and hydrogenated DLC (H-DLC) coatings' surfaces using a physical vapour deposition (PVD) process. The friction force curves obtained from slid...

Poly aryl-ether-ether-ketone (PEEK) is an alternative to metal alloys in orthopedic applications. Although the polymer provides many significant advantages such as excellent mechanical properties and non-toxicity, it suffers from insufficient elasticity and biocompatibility. Since the elastic modulus of diamond-like carbon (DLC) is closer to that of cortical bone than PEEK, the DLC/PEEK combina...

X-ray absorption near-edge structure (XANES) and valence-band photoemission spectroscopy (VB-PES) were used to elucidate the electronic and mechanical properties of diamond-like carbon (DLC) thin films deposited by the plasma-enhanced chemical vapour deposition method at various bias voltages (V(b)) using a C(2)H(2) vapour precursor in an Ar(+) atmosphere. The increase of V(b) is found to incre...

Diamond-like carbon (DLC) is a metastable form of amorphous carbon having large sp 3 bonding. DLC films have unique properties such as high hardness, low-friction, good transparency in IR region, chemical inertness and biocompatibility. To have better performance of the coating one should have proper selection of different parameters for deposition. In the present study, DLC films were deposite...

Diamond-like carbon (DLC) ®lms, amorphous hydrogenated or nonhydrogenated forms of carbon, are metastable amorphous materials characterized by a range of attractive mechanical, chemical, tribological, as well as optical and electrical properties. The ®lms can be prepared at low temperatures, from a large variety of precursors, by a diversity of techniques, and their characteristics can be modi®...

The main obstacle for the application of high quality diamond-like carbon (DLC) coatings has been the lack of adhesion to the substrate as the coating thickness is increased. The aim of this study was to improve the filtered pulsed arc discharge (FPAD) method. With this method it is possible to achieve high DLC coating thicknesses necessary for practical applications. The energy of the carbon i...

Pure carbon(C), nitrogen(N) and titanium(Ti) doped diamond-like carbon (DLC) coatings were deposited on silicon (Si) micro-molds by dc magnetron sputtering deposition to improve the tribological performance of the micro-molds. The coated and uncoated Si molds were used in injection molding for the fabrication of secondary metal-molds, which were used for the replication of micro-fluidic devices...

Using DC-Plasma Enhanced Chemical Vapour Deposition (PECVD) system, the impact of pure Co onthe growth of diamond-like carbon (DLC) nano-structures were investigated. In this study, Acetylene(C2H2) was diluted in H2 and used as the reaction gas and Cobalt (Co) nano-particles were used asthe catalyst. The effect of preparing Co catalyst at temperatures of 240°C and 350°C and growthconditions was...

Diamond-like carbon (DLC) thin films used in this study were prepared with DC magnetron sputtering deposition. Silicon (100) wafers were used as the substrates onto which an RF bias was applied during the film deposition. For the nitrogen doped DLC films, a pure graphite target was used as the carbon source and nitrogen gas was introduced into the deposition chamber via a mass flow controller. ...

In this study, Ti, Al and N doped DLC – referred to here after as “(Ti,Al)CN/DLC composite”- coating and pure diamond-like coating (DLC) were produced by cathodic arc deposition technique and the effects of the coating thickness on their tribological properties were evaluated. The coatings were characterized, using scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffrac...