Transformation induced plasticity (TRIP) steels have a vast application in automotive industry because of theirhigh strength, high ductility and hence excellent energy absorption capacity. These characteristics of TRIPsteels are due to the existence of retained austenite in their microstructures in the ambient temperature, whichtransforms to the martensite phase during deforma...

Abstract: In the current work, the strain hardening behavior of dual-phase steels with different silicon content (0.34- 2.26 Wt. %) was examined using the modified Crussard-Jaoul analysis. It was shown that these dual-phase steels deform in two stages over a uniform strain range. Each stage exhibited a different strain hardening exponent varying with silicon content. At the first stage, work...

Strain-induced phase transformation and damage accumulation in austenitic stainless steel subjected to cyclic loading were investigated by nondestructive evaluation. The cyclic loading test was performed at various strain amplitudes at the same strain rate. The volume fraction of the strain-induced phase transformation (α′-martensite) was determined by ferrite scope and magnetic coercivity meas...

Stimulated by recent experimental results on superelastic NiTi shape memory alloy, a theoretical study is carried out to quantify the effect of plasticity on stress-induced martensite transformation, using a constitutive model that combines phase transformation and plasticity. A constraint equation is introduced to quantify the phenomenon of the stabilisation of plasticity on stress-induced mar...

in this study, the effects of nitrogen addition on the production of ultrafine/nano grained aisi 201l stainlesssteel by advanced thermo-mechanical process were investigated. cast samples were first homogenized at 1200 °c for 4 h, hot-rolled at 1100 °c and finally, solution-annealed at 1150 °c for 2.5 h. unidirectional and cross multipass cold rolling at 25 °c was carried out to 90% reduction in...

An ultrafine grained dual phase (UFG DP) steel containing niobium was produced by a new route utilizing simple cold-rolling and subsequent intercritical annealing of ferrite/martensite duplex starting structures. The effects of intercritical holding time on the microstructural evolutions and mechanical properties were studied. The results showed that increasing intercritical holding time enhnac...

in this research, effect of the number of nodular graphite particles, as an important characteristic of ductile cast irons, on the distribution of martensite in dual-phase ductile iron has been studied. ductile iron samples were produced by step casting and the samples were then annealed in order to achieve a fully ferritic structure. a special heat treatment was conducted to produce dual matri...

In this study, the effects of nitrogen addition on the production of ultrafine/nano grained AISI 201L stainless steel by advanced thermo-mechanical process were investigated. Cast samples were first homogenized at 1200 °C for 4 h, hot-rolled at 1100 °C and finally, solution-annealed at 1150 °C for 2.5 h. Unidirectional and cross multipass cold rolling at 25 °C was carried out to 90% reduction i...