In this study accumulative roll bonding (ARB) process up to 8 Cycles (equivalent strain of 6.4) at ambient temperature was used in order to improve the mechanical properties of Commercial purity titanium (CP-Ti).Several experiment has been done and Mechanical properties of specimen has been discussed. For investigating optical microscope punching and hardness test were utilized. This is the fir...

Cemented paste backfill structures are complex underground cementitious structures. After fresh cemented paste backfill (CPB; a mix of tailings, binder and water) is poured into underground stopes (mined-out voids), its strength which is a key mechanical design criterion of CPB structures, gradually develops with time. The development of CPB strength is governed by the coupled thermo-hydro-mech...

PURPOSE To examine and compare in an ex vivo study different nitinol stent designs intended for the superficial femoral artery (SFA) with regard to the appearance of fracture. METHODS Seven different 8-×40-mm nitinol stents were evaluated (Misago, Absolute, Smart, Luminexx, Sentinol, Lifestent NT, and Sinus-Superflex). Finite element analysis (FEA) was used for digitalized stent design compar...

This paper provides experimental results to investigate the mechanical properties of sustainable strain-hardening cement composite (2SHCC) for infrastructures after freeze-thaw actions. To improve the sustainability of SHCC materials in this study, high energy-consumptive components-silica sand, cement, and polyvinyl alcohol (PVA) fibers-in the conventional SHCC materials are partially replaced...

An experimental study of plain concrete specimens of water-cement ratio 0.55, subjected to 0, 15, 25, 40, 50 and 75 cycles of freeze-thaw was completed. The dynamic modulus of elasticity (DME), weight loss, compressive strength, tensile strength, flexural strength, cleavage strength and stress-strain relationships of plain concrete specimens suffering from freeze-thaw cycles were measured. The ...

Experiments are presented of the response of pseudoelastic NiTi wires subjected to displacement controlled cycles. A custom-built thermo-mechanical testing apparatus is used to control the background temperature field of the wire specimen while allowing the evolution of transformation fronts to be tracked by full-field infrared imaging. Two experiments under similar end-displacement histories, ...