The purpose of the study was to increase the dissolution and bioavailability of BCS class II drug, paliperidone by amorphization. The technique that was evaluated for preparing amorphous paliperidone (PAL) was Hot Melt Extrusion (HME). In case of hot melt extrusion process, copovidone was used essentially as a hydrophilic polymer with plasticizers like PEG (6000 and 20000), stearic acid and cet...

Thermal stability is of major importance in polymer extrusion, where product quality is dependent upon the level of melt homogeneity achieved by the extruder screw. Extrusion is an energy intensive process and optimisation of process energy usage while maintaining melt stability is necessary in order to produce good quality product at low unit cost. Optimisation of process energy usage is timel...

Isotactic polypropylenes (iPP) with different melt flow indexes (MFI) were used to fabricate nanocomposites (NCs) with 10 wt % loadings of multi-wall carbon nanotubes (MWCNTs) using ultrasound-assisted extrusion methods to determine their effect on the morphology, melt flow, and electrical properties of the NCs. Three different types of iPPs were used with MFIs of 2.5, 34 and 1200 g/10 min. Fou...

The production rate of polymer fibers by extrusion is usually limited by the appearance of a series of instabilities ("melt fracture") that lead to unwanted undulations of the surface. We present both qualitative and quantitative experimental evidence that-in addition to previously known polymer-specific scenarios-there is an intrinsic route towards melt fracture type phenomena: a nonlinear ("s...

Many fabrication processes for polymeric objects include melt extrusion, in which the molten polymer is conveyed by a ram or a screw and the melt is then forced through a shaping die in continuous processing or into a mold for the manufacture of discrete molded parts. The properties of the fabricated solid object, including morphology developed during cooling and solidification, depend in part ...

Hot Melt Extrusion (HME) is well known process for the Plastic Industries but it is well accepted by the pharmaceutical industries for the last three decays. With the use of HME we can increase solubility and bio-availability of the API. HME has proven to be a robust method of producing numerous drug delivery systems like modified, controlled and targeted drug delivery systems.HME is a solvent ...

In this report a concise review is given of the literature on slip phenomena at the wall of extrusion devices and the role of slip-laws in modeling of extrusion instabilities. In section 2 the main three instabilities are discussed: spurt, in which big pressure oscillations occur and the extrudate leaves the die in an oscillating way, sharkskin, which leads to more or less regular surface defec...

The use of hot-melt extrusion for preparing homogeneous API-excipient mixtures is studied for miconazole-PEG-g-PVA [poly(ethylene glycol)-poly(vinyl alcohol) graft copolymer] solid dispersions with a 5 cm(3) table-top, twin-screw corotating microcompounder (DSM Xplore). Phase behavior of PEG-g-PVA, miscibility of miconazole in PEG-g-PVA and the partitioning of miconazole between PEG and PVA amo...

Stereo topography of an area near Tyre impact crater, Europa, reveals chaos regions characterised by marginal cliffs and domical topography, rising to 100–200 m above the background plains. The regions contain blocks which have both rotated and tilted. We tested two models of chaos formation: a hybrid diapir model, in which chaos topography is caused by thermal or compositional buoyancy, and bl...