The feasibility of using catalytic conversion of methanol to formaldehyde to produce standard amount of substance fractions of formaldehyde was examined. The conversion efficiencies of several catalysts were measured as a function of temperature, balance gas, catalyst bed length, and methanol amount of substance fraction in an effort to identify conditions which yield high and consistent conver...

A direct approach for producing methanol from methane in a three-step, liquid phase process is reported. In the first step, methane is reacted with SO3 to form methanesulfonic acid (MSA) at 75 8C using a free-radical initiator and MSA as the solvent. Urea-H2O2 in combination with RhCl3 is found to be the most effective initiator (57% conversion of SO3; 7.2% conversion of CH4). MSA is then oxidi...

Formation of adamantane hydrocarbons and their confinement in SAPO-34 caused the long induction period and the quick catalyst deactivation in methanol conversion. Via ship-in-a-bottle synthesis, adamantane and methyladamantanes could be produced from methanol conversion in the cage of 8-ring SAPO catalysts under very mild reaction conditions.

For automotive applications, it is necessary to maximize the fuel conversion efficiency of a PEM direct-methanol fuel cell (DMFC) over the broadest possible dynamic range of power. The research reported here critically examines the efficiency of the DMFC stack when operated over a broad power range. This research establishes a basis for a control strategy that simultaneously: optimizes DMFC fue...

Recently, methane has attracted much attention as an alternative carbon feedstock since it is the major component of abundant shale and natural gas. In this work, we produced methanol from methane using whole cells of Methylosinus trichosporium OB3b as the biocatalyst. M. trichosporium OB3b was cultured on NMS medium with a supply of 7:3 air/methane ratio at 30°C. The optimal concentrations of ...

In biodiesel production, the vegetable oil used as raw material for transesterification should be free of water and free fatty acids (FFAs), which may consume catalyst and reduce catalyst efficiency. In this work biodiesel was prepared from acidified oils (AO) through a supercritical methanol route, in which the esterification of FFAs and transesterification of glyceride with methanol occurred ...

Intermetallic Ni3Al – based alloys belong to a group of advanced materials characterized by good chemical and physical properties (such as structural stability, corrosion resistance) which offer advenced technological applications. The paper presents the study of catalytic properties of Ni3Al foils (thickness approximately 50 μm) in the methanol and hexane decomposition. The egzamined material ...

Energy-intensive chemical conversion of crude algal oils into biodiesel is a major barrier for cost-effective algal biofuel production. To overcome this problem, we developed an enzyme-based platform for conversion of crude algal oils into fatty acid methyl esters. Crude algal oils were extracted from the oleaginous microalga Nannochloropsis oceanica IMET1 and converted by an immobilized lipase...

MSU-S mesoporous catalyst with [SiO2]/[Al2O3] ratio of 55 was synthesized using tetrapropylammonium hydroxide (TPAOH) as a structure directing agent and hexadecyltrimethylammonium bromide (CTAB) as a surfactant. The catalytic activity of the calcined sample was evaluated for the dehydration of methanol to dimethyl ether (DME) in a vertical fixed bed microreactor...