In this study, microcrystalline cellulose (MCC) was extracted from oil palm empty fruit bunch (EFB) cellulose which was earlier isolated from oil palm EFB fibre. In order to isolate the cellulose, the chlorination method was carried out. Then, the MCC was prepared by simultaneous ultrasonic and alkali treatment from the isolated α-cellulose. Based on mass balance calculation, the yields for MCC...

objective(s) the aim of this study was to investigate the possibility of production of ibuprofen pellets with high amount of rate retarding polymer by aid of peg400 as plasticizer. materials and methods polyethylene glycol (peg400) in concentrations of 1, 3 or 5% w/w with respect to eudragit rl was used in production of pellets containing 60% ibuprofen and 40% excipient (2% polyvinylpyrrolidone...

The study evaluates the micronized poloxamers Lptrol micro127 (poloxamer 407) and Lptrol micro 68 (poloxamer 188) as lubricants in combination with the dry binders microcrystalline cellulose and spray-dried lactose. Magnesium stearate was employed as the comparative lubricant. The parameters under study included energy for friction, plasticity, ejection force, tensile strength of tablets, and d...

The aim of this study was to develop and optimize a segregation-free ethyl cellulose-coated extended release multiparticulate formulation to be compressed into tablets without affecting the drug release. Standard tableting excipients (e.g., microcrystalline cellulose, lactose or sorbitol) were layered onto ethyl cellulose-coated propranolol hydrochloride pellets to form a cushion layer in order...

In order to obtain accurate information about the ultrastructure of cellulose from native biomass by 13C cross polarization magic angle spinning (CP/MAS) NMR spectroscopy the cellulose component must be isolated due to overlapping resonances from both lignin and hemicellulose. Typically, cellulose isolation has been achieved via holocellulose pulping to remove lignin followed by an acid hydroly...

In this study, we aimed to dissolve microcrystalline cellulose (MCC) with phosphoric acid to obtain high-quality fermentable saccharides. MCC was directly dissolved in phosphoric acid (the concentration was 83%) for 10 hours at temperatures of 30, 50, and 70 degrees C. The structural changes of MCC were determined in detail with X-ray powder diffraction, solid-state cross-polarization magic ang...

Hydrolysis is a reaction to produce sugars from lignocellulosic raw materials for biochemical production. The present study elucidates the hydrolysis of cellulose and formation of glucose decomposition products catalyzed by 5% to 20% (w/w) formic acid at 180 to 220 °C with an initial cellulose concentration of 10 to 100 g/L. Microcrystalline cellulose was used as a model compound. The experimen...

A test substance with characteristics and properties similar to those of cellulose· based solid waste products is needed to calibrate calorimeters and combustors which will be routinely burning these materials to determine their calorific values precisely for use in commerce. Microcrystalline cellulose was found to be a good calibrant for this purpose. The enthalpy of combustion of microcrystal...

USE OF MERCURY POROSIMETRY AND NITROGEN ADSORPTION IN CHARACTERISATION OF THE PORE STRUCTURE OF MANNITOL AND MICROCRYSTALLINE CELLULOSE POWDERS, GRANULES AND TABLETS Sari Westermarck, 2000, University of Helsinki (FIN), pp. 50. ISBN952-91-2534-8 The effects of pretreatment and scanning speed of mercury porosimetry on the mercury porosimetry results of non-hygroscopic mannitol and hygroscopic mi...