Recent developments in the study of the laser bending process are reviewed and presented to obtain new perspectives along the lines of dimensional characteristics and mechanical properties of the formed parts. Both numerical and experimental results are described and compared. The dimensional characteristics examined include bending angle variation and bending edge curving. The mechanical prope...

Increasing use of aluminum shape castings in automotive and aerospace industries has drawn great attention to fatigue properties of cast aluminum components. The fatigue resistance of aluminum castings strongly depends upon the presence of casting flaws and characteristics of microstructural constituents. The existence of casting flaws significantly reduces fatigue crack initiation life. In the...

A new experimental approach is used to quantify the full field heterogeneous strain accommodation associated with martensitic phase transformation in Nickel–Titanium at the microstructural length scale. Local deformation measures were matched with underlying microstructural characteristics obtained by EBSD, providing point-by-point correlation between transformation extent and microstructure. I...

A two-stage sintering practice was applied to W­3.99Ni­1.71Fe (mass%) to control its microstructural evolution and, accordingly, mechanical properties under high strain rates. Unlike the traditional one-stage liquid phase sintering, the alloy was first solid-state-sintered to close to full densification, and then liquid-phase-sintered by induction heating where the cooling rate was fast. With t...

The frequency dependent ac conductivity and permittivity of porous lead zirconate titanate ceramic with the pore volume filled with water are shown to match the simulated electrical response of a large network of randomly positioned resistors and capacitors. Anomalous power law dispersions in conductivity and permittivity are shown to be an electrical response characteristic of the microstructu...

A method for finding the microstructural parameters of low-carbon steel using its metallographic images is proposed. It allows to determine the following parameters: the ratio of perlite to ferrite phases, the parameters of grains of crystallites and their mutual arrangement; the degree of granularity of the pearlite phases. The method is aimed at predicting the strength characteristics of stee...