Efficient Solid waste utilization is a challenging task. In rural areas organic wastes like cattle waste is available in abundant, which is not utilized in the valuable forms and in urban areas it is disposed off in an improper manner. In this study biogas primarily from cattle waste was generated by using a fabricated anaerobic biogas digester. The methane is easily separated from biogas by re...

Hydride formation was studied on Pd particles supported on SiO2, and the results were evaluated with reference to a corresponding ZnO-promoted Pd/SiO2 catalyst reported recently. Pd particles (mean size, ~5 nm) were epitaxially grown on NaCl(001) cleavage faces and subsequently covered by a layer of amorphous SiO2, thereby maintaining their epitaxial orientation. The films were subjected to var...

Hydrogenation of levulinic acid (LA) and its esters to produce γ-valerolactone (GVL) and 2-methyl tetrahydrofuran (2-MTHF) is a key step for the utilization of cellulose derived LA. Aiming to develop a commercially feasible base metal catalyst for the production of GVL from LA, with satisfactory activity, selectivity, and stability, Al2O3 doped Cu/SiO2 and Cu/SiO2 catalysts were fabricated by c...

Oxidative coupling of methane (OCM) is a promising method for the direct conversion of methane to ethene and ethane (C2 products). Among the catalysts reported previously, Mn2O3-Na2WO4/SiO2 showed the highest conversion and selectivity, but only at 800° to 900°C, which represents a substantial challenge for commercialization. We report a TiO2-doped Mn2O3-Na2WO4/SiO2 catalyst by using Ti-MWW zeo...

a simple highly versatile and efficient sonochemical synthesis of 1,2,4,5-tetrasubstituted and 2,4,5-trisubstituted imidazoles is achieved by condensation of 1,2-dicarbonyl compound, aldehyde, ammonium acetate and primary amine using antimony trichloride immobilized on silica gel (sio2-osbcl2) as a catalyst in ethanol at moderate temperature. operational simplicity, practicability and applicabi...

A comparison study has been conducted on the formation of catalyst nanoparticles on a high surface tension metal and low surface tension oxide for carbon nanotube CNT growth via catalytic chemical vapor deposition CCVD . Silicon dioxide SiO2 and tantalum have been deposited as supporting layers before deposition of a thin layer of iron catalyst. Iron nanoparticles were formed after thermal anne...

A simple, green and efficient method for synthesis of 2,4,5-trisubstituted imidazoles is described via three-component cyclocondensation of benzil or benzoin, aldehyde and ammonium acetate by using the nano SiO2-supported ferric hydrogen sulfate (FHS/SiO2), as a catalyst, under solvent-free conditions. The nano SiO2 support and catalyst were characterized by X-ray diffraction (XRD), transmissio...

Low-temperature growth, as well as the transfer free growth on substrates, is the major concern of graphene research for its practical applications. Here we propose a simple method to achieve the transfer free graphene growth on SiO2 covered Si (SiO2/Si) substrate at 250 °C based on a solid-liquid-solid reaction. The key to this approach is the catalyst metal, which is not popular for graphene ...

ethylene polymerization was carried out using phillips chromium catalyst based on silica supports such as silicaaerogel, sio2 (grace 643), and titanium modified sio2 (g 643), and the results were compared with othercatalysts based on sio2 (aldrich), sba-15(hex), sba-15(sp) and mcm-41. a combination of tga, dsc, xrd,nitrogen adsorption, sem, icp, ftir and other analyses were used to characterize...

a new magnetic nanocatalyst has been prepared using immobilization of vanadate onto aminopropyl functionalized sio2/fe3o4(vo3-/nh3+-sio2/fe3o4). the obtained magnetic catalyst was characterized by ft-ir, xrd, vsm and sem techniques and used for sulfoxidation of sulfide compounds to the correspondingsulfoxides in presence of h2o2 as oxidant at room temperature. the optimum of reaction conditions...