This paper presents a low cycle fatigue life curve by simulating a crack in a cover plate welded moment connection. Initiation of ductile fracture in steel is controlled by growth and coalescence of micro-voids. This research used a numerical method using finite element modeling and simulation of ductile crack initiation by a micromechanical model. Therefore, a finite element model of a cover p...

In welded tubular joints, when the fatigue crack depth is less than 20% of chord wall thickness, the crack growing process is highly affected by weld geometry.&#10 Hence, T-butt solution and weld magnification factor (Mk) are applicable tools for evaluating the crack growth rate in this domain. In this research, the capability of Artificial Neural Network (ANN) for estimating the Mk of weld toe...

In welded tubular joints, when the fatigue crack depth is less than 20% of chord wall thickness, the crack growing process is highly affected by weld geometry. Hence, T-butt solution and weld magnification factor (Mk) are applicable tools for evaluating the crack growth rate in this domain. In this research, the capability of Artificial Neural Network (ANN) for estimating the Mk of weld toe c...

Stable ductile crack growth in 3 mm thick AISI 304 stainless steel specimens has been investigated experimentally and numerically. Multi-linear Isotropic Hardening method coupled with the Von-Mises yield criterion was adopted for modeling elasto-plastic behavior of the material. Mode-I CT fracture specimens have been tested to generate experimental load-displacement-crack growth data during sta...

Modeling of stress corrosion cracking (SCC) is performed using the combination of the finite element method and the symmetric Galerkin boundary element method. The uncracked structural component is represented with finite elements. The crack is simulated using the boundary element method. The superposition principle is employed for combining two solutions. The equilibrium state for the system o...

Intersonic crack growth has been studied using an interfacial fracture model in which an additional material phase within a bonding layer is proposed to describe the failure behavior of the interface. In this material phase, a strain gradient based damage model is applied with a built-in cohesive law, which is governed by an material intrinsic length scale that bridges the mechanisms that opera...

As fretting fatigue cracks are initiated at an early stage of life, the fretting fracture process is dominated by the stable growth of cracks. Hence the measurement of crack length is very important. This paper demonstrates the suitability of the DC potential drop technique for the measurement of fretting cracks. A calibration has been established for monitoring crack growth in BS L65 copper al...

This paper presents a methodology to quantify the uncertainty in fatigue damage prognosis, applied to structures with complicated geometry and subjected to variable amplitude multi-axial loading. Finite element analysis is used to address the complicated geometry and calculate the stress intensity factors. Multi-modal stress intensity factors due to multi-axial loading are combined to calculate...

This paper presents a methodology for assessing the confidence and the predictive capability of prognosis models, using the application of fatigue crack growth analysis. Structures with complicated geometry and multi-axial variable amplitude loading conditions are considered. Several models – finite element model, crack growth model, retardation model, surrogate model, etc. – are efficiently co...