chemical flooding, especially alkaline/surfactant/polymer flooding, is of increasing interest due to the world increasing oil demand. this work shows the aspects of using alkaline/surfactant/polymer as an enhanced oil recovery method in the porous media having a high dead-end pore frequency with various dead-end pore parameters (such as opening, depth, aspect ratio, and orientation). using glas...

The conventional oil recovery system in the Fushun oil shale retorting plant has a low oil recovery rate. A large quantity of fresh water is used in the system, thereby consuming a considerable amount of water and energy, as well as polluting the environment. This study aims to develop a closed process of shale oil recovery from the circulating washing water for the Fushun oil shale retorting p...

gravity drainage is one of the important recovery mechanisms in fractured carbonate and conventional reservoirs. it occurs due to density difference between the gas in fracture and the oil in matrix as well as in conventional tilted reservoirs. oil phase will form films which are produced under gravity forces (film flow). many gas injection experiments have been done on laboratory scales with d...

Gas injection into heavy oil reservoirs could result in high ultimate recovery of oil. Experimental studies showed that an application of a combined technology of Gas Assisted Gravity Drainage (GAGD) and Vapor Extraction (VAPEX) could increase final oil recovery of a candidate viscous oil reservoir. In this paper the results of laboratory investigation are presented, including Pressure-Volu...

Tiger nut (Cyperus esculentus) tuber contains oil that is high in monounsaturated fatty acids, and this oil makes up about 23% of the tuber. The study aimed at evaluating the impact of several factors and enzymatic pre-treatment on the recovery of pressed tiger nut oil. Smaller particles were more favourable for pressing. High pressure pre-treatment did not increase oil recovery but enzymatic t...

In oil industry, recovery of crude oil can be improved by injecting aqueous solutions containing surfactants, polymers, and mineral ions into an oil reservoir. This process is called enhanced oil recovery. Water and oil are immiscible, separated by an interface, and their motion through a capillary tube is governed by the surface tension. However, the physics can be more complex during an enhan...

monolithic aerogels of high molecular weight polyethylene (mw= 3x106- 6x106 g/mol) have been prepared by solvent extraction with supercritical carbon dioxide from thermoreversible gels prepared in decalin. these low density and highly porous aerogels present an apparent porosity up to 90%. the aerogel morphology observed by scanning electron microscopy (sem) is characterized by spherulitic stru...

recovery factor is an important parameter in determining commercial viability of the oil reservoirs. wettability is a major factor that affects oil recovery. therefore, changing rock wettability may enhance oil recovery. in this paper, the effect of polysilicon nanoparticles on wettability change of iranian carbonate reservoir is investigated. to assess this, hydrophilic changes of carbonate ro...

in many reservoirs, after water flooding, a large volume of oil is still left behind. hot water injection is the most basic type of thermal recovery which increase recovery by improved sweep efficiency and thermal expansion of crude.in the present work, the effects of injection rate and the temperature of the injected water were surveyed by using core flooding apparatus. water flooding was perf...