Researcher: Royce Fernandes Title: Investigation of Pin Fin Cooling Channels for Applications in Gas Turbines Institution: Embry-Riddle Aeronautical University Degree: Master of Science in Aerospace Engineering Year: 2016 Gas turbine blades are often cooled using internal cooling channels to prevent failure at temperatures beyond material limitations. Pin fin channels are commonly used on the t...

New pressure drop / flow rate measurements coupled with a previously reported heat transfer database have resulted in new friction factor and heat transfer correlation equations for fan-driven impinging flow through square arrays of cylindrical cross-section pin-fins. The correlation equations include the effect of coolant flow rate, pin-fin density and pinfin height. A comparison with a simila...

Christopher L. Chapman, and Seri Lee Aavid Engineering, Inc. Laconia, New Hampshire 03247 Bill L. Schmidt Silicon Graphics Computer Systems Mountainview, California 94039 Comparative thermal tests have been carried out using aluminum heat sinks made with extruded fin, cross-cut rectangular pins, and elliptical shaped pins in low air flow environments. The elliptical pin heat sink was designed t...

The computational fluid dynamics is concentrated on the forced air cooling of the CPU using a heat sink. This paper utilizes CFD to identify a cooling solution for a desktop computer, which uses an 80 W CPU maximum whereas this number will be increased in the range of 70-120W in the forthcoming desktop computer systems. The design is able to cool the chassis with one fan with air blowing over h...

The helium-cooled modular divertor concept with integrated pin array developed by the Karlsruhe Research Center (FZK) is unusual among helium-cooled tungsten divertor designs in that it relies upon an array of pin fins on the back of the cooled surface, instead of jet impingement, to cool the plasma-facing surface. The Georgia Tech group experimentally studied a similar design constructed of br...

Small minimum temperature approach, large surface area per volume, high heat transfer efficiency and possibility of handling several streams of multi-stream plate-fin heat exchangers lead to more heat recovery and smaller heat exchanger size. Therefore, plate-fin heat exchangers have been applied extensively in sub-ambient processes. However, one major difficulty in optimising the design of pla...