The method of magnetic flux leakage (MFL) is widely used for examination of pipeline wall to detect the presence of internal and external stress-corrosion. Magnetic scanner in which the MFL method is realized provides the pipe wall material magnetization, after magnetization the MFL is registered by magnetic field sensors. The stress-corrosion defects present in the pipeline wall are detected b...

Temperature is expected to play a significant role in the corrosion of iron pipes in drinking water distribution systems. Temperature impacts many parameters that are critical to pipe corrosion including biological activity, physical properties of the solution, thermodynamic and physical properties of corrosion scale, and chemical rates. Moreover, variations in temperature and temperature gradi...

Gas pipe failure caused by inner corrosion defects is one of the risk factors for the unscheduled shutdown of a plant. The pipes must be inspected to reduce the risk, but this requires a great amount of time and money, since gas pipes are quite long. This research proposes a screening method for the efficient inspection of gas pipes caused by aqueous corrosion. This screening method consists of...

MFL (Magnetic Flux Leakage) inspection is one of the most commonly used methods for detecting corrosion defects in pipelines. Normally, an MFL system is divided into three parts: in-pipe inspector, out-of-pipe locating system and data analyzing system, and AGM (Above Ground Marker) is a crucial device to locate the corrosion. With the fact that most currently existing AGM devices lack flexibili...

A pilot study was designed to examine the impact of nutrient levels, pipe materials, and disinfection on the survival of M. avium in model drinking water distribution system biofilms. Studies showed that the survival of the organism was dependant upon a complex interaction between pipe surface, nutrient levels, and disinfectants. The findings showed that when no disinfection was applied, M. avi...

Remote-Field Eddy-Current (RFEC) technology is often used as a Non-Destructive Evaluation (NDE) method to prevent water pipe failures. By analyzing the RFEC data, it is possible to quantify the corrosion present in pipes. Quantifying the corrosion involves detecting defects and extracting their depth and shape. For large sections of pipelines, this can be extremely time-consuming if performed m...

Fe-2.25Cr-1Mo a widely used material for headers and steam tubes of boilers. Welding of steam tube to header is required for production of boiler. Heat affected zone of the weld can have poor mechanical properties and poor corrosion behavior leading to weld failure. The cost of material used for steam tube and header of boiler should be controlled. This study propose a new materials design for ...

thickness and corrosion/erosion rate. In this thesis, a combination of signal processing techniques are used to estimate the corrosion rate estimates based on MBE. Corrosion rate is estimated based on ultrasonic pipe wall thickness data is collected over a short period of time using MBE model. This technique is based on data collected from the speedometer applied for thinning and both indicate ...

The electroma.gnetic, noncontact transducer (EMAT) is particularly well suited to ultrasonic inspec~ tion problems where it is difficult or impossible to couple the sound into the object being tested ~ through a liquid or grease layer. For inspecting buried natural gas pipelines, the inspection process must be carried out by a self contained instrument package blown through the pipe by the gas ...

The goal of cathodic protection is to prevent corrosion by maintaining buried pipelines at a constant potential with respect to the surrounding soil. In practice, however, the implementation is very complicated since many factors can contribute to the current flowing off the pipe. Design requires characterization of the parameters impacting the corrosion process, such as soil resistivity, size ...