This paper (SPE 173892) was revised for publication from paper OTC 25335, first presented at the Offshore Technology Conference, Houston, 5–8 May 2014. Original manuscript received for review 20 June 2014. Revised manuscript received for review 27 October 2014. Paper peer approved 4 November 2014. Summary Steel catenary risers (SCRs) on a large-heave-motion vessel are susceptible to compression...

Plastic deformation in the form of slip lines is observed in front of notches in pure epoxy and robber-toughened epoxy specimens under four-point bending. In contrast to the case for pressure-insensitive materials, the angles between two families of slip lines emanating from notch surfaces are not 90°: they are smaller than 90 ° under tension, but they are larger than 90 ° under compression. Fo...

Thermal non-destructive testing and evaluation of glass fibre reinforced plastic materials has gained more importance in aerospace industry due to low weight and high strength capabilities in severe environmental conditions. More recently, pulse compression favorable non-stationary excitation schemes have been exhibiting reliable defect detection capabilities in infrared non-destructive testing...

a study has been made of the compaction properties of two experimental starches, namely yam starch obtained from dioscorea rotundata and rice starch obtained from oryza sativa and the mechanical properties of their tablets, in comparison with those of official corn starch. the influences of the physical and geometric properties of the starch particles on the compression properties of the starch...

Inheriting amorphous atomic structures without crystalline lattices, bulk metallic glasses (BMGs) are known to have superior mechanical properties, such as high strength approaching the ideal value, but are susceptible to catastrophic failures. Understanding the plastic-flow dynamics of BMGs is important for achieving stable plastic flow in order to avoid catastrophic failures, especially under...

A study has been made of the compaction properties of two experimental starches, namely yam starch obtained from Dioscorea rotundata and rice starch obtained from Oryza sativa and the mechanical properties of their tablets, in comparison with those of official corn starch. The influences of the physical and geometric properties of the starch particles on the compression properties of the starch...

A study has been made of the compaction properties of two experimental starches, namely yam starch obtained from Dioscorea rotundata and rice starch obtained from Oryza sativa and the mechanical properties of their tablets, in comparison with those of official corn starch. The influences of the physical and geometric properties of the starch particles on the compression properties of the starch...

A new plasticity criterion for mixed mode crack initiation angles under compression is presented, based on the characteristics of the plastic core region surrounding the crack tip with crack surface friction. The shape and size of the plastic core region were thoroughly analyzed under compression and the non-dimensional variable radius of the plastic core region for mixed mode compressive fract...

Abstract   In this study, generalized differential quadrature analysis of elastic/plastic buckling of skew thin plates is presented. The governing equations are derived for the first time based on the incremental and deformation theories of plasticity and classical plate theory (CPT). The elastic/plastic behavior of plates is described by the Ramberg-Osgood model. The ranges of plate geometries...

Physical aging and plastic flow are known to cause changes in the properties of glassy polycarbonate (PC). Although the individual effects of physical aging and plastic flow have been studied, the combined mechanical and thermal effects have yet to be evaluated for PC at large plastic strains. This work is the first characterization of the combined effects in PC of large plastic flow followed b...