A numerical and experimental investigation of flow and heat transfer in a gas- liquid Thermosyphon Heat Exchanger "THE" with built in heat pipes and aluminum plate fins for moderate Reynolds numbers has been carried out. It's module is composed of 6 rows and 15 columns copper pipes with aluminum plate fins with dimensions of 130cm height, 47cm width and  20cm depth. The tubes have been fill...

In this paper, a comprehensive study on the performance of parallel plate and rectangular micro channel counter flow heat exchangers is presented. The geometrical parameters of the two configurations are optimized for a given heat transfer rate, effectiveness and pressure drop. In case of rectangular micro channel counter flow heat exchanger, a reduced order model is developed first in which re...

Heat exchanger is an essential device used in complex engineering systems related to heat transfer processes in many industrial applications. Plate Heat Exchanger (PHE) is an important part of a condensing or evaporating system. Among many of factors which should concentrate on, the heat transfer and pressure drop is most important part during sizing and rating the performance of PHE. Due to th...

Nanofluids are colloidal suspensions of nanosized particles in the conventional base fluid such as water, engine oil and ethylene glycol. The nanoparticles include the chemically stable metals, metal oxides and nonmetallic. In the present study, the literature available on the applications of nanofluids in plate heat exchanger have been compiled and reviewed. However, this paper elaborates the ...

In this study, the air-side pressure drop and heat transfer performance of plate-fin and microchannel coils were tested under clean and fouled conditions. The heat exchangers were tested with two different types of dust, ASHRAE dust and Arizona Road Test Dust. The ASHRAE dust was found to have a very significant impact on the pressure drop of the microchannel heat exchanger, increasing the air-...

In this study, the air-side pressure drop and heat transfer performance of plate-fin and microchannel coils were tested under clean and fouled conditions. The heat exchangers were tested with two different types of dust, ASHRAE Standard Dust and Arizona Road Test Dust. The ASHRAE dust was found to have a very significant impact on the pressure drop of the microchannel heat exchanger, increasing...

plate heat exchangers are widely used in industries due to their special characteristics, such as high thermal efficiency, small size, light weight, easy installation, maintenance, and cleaning. the purpose of this study is to consider the effect of depth, angle, and pitch of hemispheric chevrons on the convective heat transfer coefficient and pressure drop. in the simulation of the heat exchan...

Title of Document Application of Plate Heat Exchanger for Low Temperature Lift Heat Pump Systems Song Li, Master of Science, 2012 Advisor Professor Reinhard Radermacher, Department of Mechanical Engineering In this thesis I investigated the energy saving potential of a low temperature lift heat pump (LTLHP) such as water source heat pump (WSHP), and studied the utilization of a plate heat excha...

in the present study, turbulent flow in channels of a plate heat exchanger with corrugated chevron plates has been simulated numerically using the commercial cfd package, fluent. unstructured mesh is used for discretizing the computational domain and simple algorithm is utilized to solve the pressure and velocity equations. there is a wide selection of different plate heat exchangers within the...

this paper presents a comprehensive theoretical, experimental, and economic study on the application of nanofluids as heat transfer fluid in waste heat recovery systems. the research work was conducted in a steel-making complex in which a plate heat exchanger had been used to recover heat from hot process water. the system was theoretically modelled and the effects of using nanofluids as heat t...