in this study, the microstructure and properties of foam glass obtained as a result of the interaction of the waste glass with sic as the foaming agent and fe2o3 as the oxidizing agent have been investigated using scanning electron microscopy (sem), as well as three-point bending and pycnometery tests. first, the temperature and optimized amount of sic for making foam glass was determined. the ...

OBJECTIVE To evaluate the mechanical properties of the Polyaxial Advanced Locking System (PAX) in screw push-out and four-point bending. MATERIALS AND METHODS Screw push-out: PAX locking screws were applied to first generation PAX plates at three different insertion angles with two different insertion torques. A load was applied parallel to the screw axis, and screw push-out force was measure...

The purpose of the present study was to evaluate the relationships among three flexural strengths of recent dental ceramics using 3-point and 4-point bending tests and biaxial flexural test. Three brands of porcelain for veneering (d.SIGN, Supper porcelain AAA, Vintage Hallo), two injectable ceramics (Empress 2, OPC 3G), and one castable ceramic (Crys-Cera) were used. Twenty bar-shaped and 10 d...

Lower limbs are normally the first contacted body region during car-pedestrian accidents, and easily suffer serious injuries. The previous tibia bending tolerances for pedestrian safety were mainly developed from three-point bending tests on tibia mid-shaft. The tibia tolerances of other locations are still not investigated enough. In addition, tibia loading condition under the car-pedestrian i...

For ex vivo measurements of fracture callus stiffness in small animals, different test methods, such as torsion or bending tests, are established. Each method provides advantages and disadvantages, and it is still debated which of those is most sensitive to experimental conditions (i.e. specimen alignment, directional dependency, asymmetric behavior). The aim of this study was to experimentally...

The piezoelectric properties of bone play an important role in the bone remodeling process and can be employed in clinical bone repair. In this study, the piezo-voltage of bone between two surfaces of a bone beam under bending deformation was measured using an ultra-high-input impedance bioamplifier. The influence of shear stress on the signs of piezo-voltages in bone was determined by comparin...

statement of problem: resin composites are a common type of tooth coloured restorative materials. these materials are brittle and their major shortcomings are sensitivity to flaws and defects, low tensile strength, and susceptibility to catastrophic failure.the role of home bleaching agents on the fracture toughness of resin composites using four-point bending test is scanty. objectives: to com...

in this study, the microstructure and properties of foam glass obtained as a result of the interaction of the waste glass with sic as the foaming agent and fe2o3 as the oxidizing agent have been investigated using scanning electron microscopy (sem), as well as three-point bending and pycnometery tests. first, the temperature and optimized amount of sic for making foam glass was determined. the ...

Usually, fatigue tests on fibre-reinforced composites are performed in uni-axial tension/tension or tension/compression fatigue [1], providing the S-N data. Although bending fatigue tests are not widely accepted as a standard, they are used a lot for research purposes [2] and they do have some important advantages [3]. In case of three-point bending fatigue, the history of bending force versus ...