in this paper, the electrochemical behaviour of passive films formed on aisi 321 stainless steel (aisi 321)immersed in 0.1 m naoh + 0.1 m koh solution was evaluated by different electrochemical techniques. forthis purpose, passive films were formed at open circuit potential for 1 to 12 hours and then electrochemicalmeasurements were done. the polarization curves suggested that aisi 321 showed e...

A circularly polarized fractal boundary microstrip antenna is presented. The sides of a square patch along xaxis, yaxis are replaced with Minkowski and Koch curves correspondingly. By using the fractal curves as edges, asymmetry in the structure is created to excite two orthogonal modes for circular polarization (CP) operation. The indentation factors of the fractal curves are optimized for pur...

Polarization curves are of paramount importance for the detection of toxic components in microbial fuel cell (MFC) based biosensors. In this study, polarization curves were made under non-toxic conditions and under toxic conditions after the addition of various concentrations of nickel, bentazon, sodiumdodecyl sulfate and potassium ferricyanide. The experimental polarization curves show that to...

this paper focused on the characterization of electrochemical behavior of a martensitic stainless steel inthe acidic solutions. for this purpose, electrochemical parameters were derived from potentiodynamicpolarization, mott schottky analysis and electrochemical impedance spectroscopy (eis) techniques.the potentiodynamic polarization results showed that corrosion current density of aisi 420 sta...

One of the attractive low activation steels is the austenitic Mn-Cr steel from the view point of waste disposal because of few long-lived nuclides. In this paper, three types of Mn-Cr austenitic steels were fabricated by vacuum induction furnace. Then plates with 10 mm thickness were fabricated by hot-rolling. The physical metallurgy of these steels was studied by the corrected Schaeffler diagr...

Inhibition performances of imidazoline derivatives with different alkyl chain length for carbon steel in H2S acid solutions has been studied by polarization curves, AC impedance measurements, current transient, Atomic Force Microscopy (AFM) and Density Functional Theory (DFT) techniques. Results showed that the inhibition occurs through adsorption of the inhibitors molecules ...

In this study, the effect of molybdate on the electrochemical behavior and semi-conductive properties of duplex stainless steel 2205 passive film at NaCl solutions was investigated. Cyclic potentiodynamic polarization, impedance spectroscopy, mott-schottky plots and scanning electron microscopy (SEM) were used to study the passive behavior. Polarization curves showed that the corrosion current ...

The effect of chloride ions concentration on the electrochemical behavior of AISI 410 stainless steel in the simulated concrete pore (0.1 M NaOH + 0.1 M KOH) solution was investigated by various electrochemical methods such as Potentiodynamic polarization, Mott–Schottky analysis and electrochemical impedance spectroscopy (EIS). Potentiodynamic polarization curves revealed that increasing chlori...

The inhibitive effect of apricot gum AG on mild steel in 0.5 M phosphoric acid solution was investigated by potentiodynamic polarization, electrochemical impedance spectroscopy EIS, linear polarization resistance and electrochemical noise EN techniques. The inhibition efficiency increased with increasing AG concentration up to a certain value and decreased with increasing temperature. Polarizat...