tellurium nanostructures have been prepared by physical vapor deposition method in a tube furnace. the experiments were carried out under argon gas flow at a pressure of 1 mbar. tellurium powder was evaporated by heating at 350°c and 430°c and was condensed on substrates at 110–250°c, in the downstream of argon gas flow. the products were characterized by field emission scanning electron micros...

Aerosol-assisted chemical vapour deposition (AACVD) of Cd[(SePiPr2)2N]2 is shown to deposit cadmium selenide and/or cadmium phosphide on glass substrates, depending upon the growth conditions. The phase, structure, morphology and composition of the films were characterised by X-ray powder diffraction (XRD), scanning electron microscopy, energy dispersive X-ray analysis and X-ray photoelectron s...

A new method to determine the degree of deacetylation (DD) of alpha-chitin and chitosan in the range of 17-94% DD using X-ray powder diffraction (XRD) is proposed. The results were calibrated using (1)H NMR spectroscopy for chitosan and FTIR for chitin, in comparison with the potentiometric titration method. The results showed a good linear correlation between the CrI020 from XRD and the calibr...

the knoevenagel condensation of aromatic aldehydes with barbituric acid, dimedone and malononitrile occurred in the presence of bf3/nano-γ-al2o3 at room temperature in ethanol. this catalyst is characterized by powder x-ray diffraction (xrd), fourier transform infrared spectroscopy (ft-ir), thermal gravimetric analysis (tga), field emission scanning electron microscopy (fesem) and energy-disper...

Nanocrystalline titanium dioxide powder is characterized for phase analysis as well as particle size and its distribution by x-ray diffraction and small angle neutron scattering measurements. Analysis of the SANS data in the momentum transfer range q = 0.1 1.8 nm reveals an average particle size of 24.82 nm in good agreement with the particle size determined earlier by transmission electron mic...

Cadmium oxide (CdO) nanoparticles have been prepared by chemical coprecipitation method. The synthesized nanoparticles were characterized by X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV analysis, and dielectric studies. The crystalline nature and particle size of the CdO nanoparticles were characterized by Powder X-ray diffract...

Palladium nanoparticles of average size around 8 nm have been synthesized rapidly by UV irradiation of mixture of palladium chloride and potassium oxalate solutions. A rod-shaped palladium oxalate complex has been observed as an intermediate. In the absence of potassium oxalate, no Pd nanoparticles have been observed. The synthesized Pd nanoparticles have been characterized by powder X-ray diff...

Powder of La0.6Sr0.4CoO3-α (LSCO) was synthesized by a combined citrate-EDTA method. The as-synthesized LSCO powder was calcined, respectively at temperatures of 800, 900 and 1000 °C with different heating/cooling rates which are 2, 5, 10 and 15 °C min. The effects of heat treatments on the phase formation of perovskite phase of LSCO were investigated by powder X-ray diffraction (XRD). The XRD ...

this paper describes day-one beamlines of the iranian light source facility and design concept of powder diffraction and spectromicroscopy beamlines as the most priorities of each synchrotron that cover the research requirements in the fields of physics, chemistry, nano-science, etc. for powder diffraction beamline energy range is 6-30 kev, resolution: 10-4, flux: 1012(ph/s/0.1%b.w.) and spot s...

Angle dispersive x-ray diffraction (ADXRD) is a basic non destructive tool for the determination of crystal structure. Energy tunability and high flux are added advantages in using synchrotron radiation (SR) source for ADXRD technique. We have installed an ADXRD beamline (BL-12) on Indus-2, the Indian synchrotron source. Indus-2 is a 2.5GeV, 300mA SR source. The beamline consists of a Si (311) ...