Experiments of propane and propene steam reforming have been performed over a Pd–Cu/c-Al2O3 catalyst and over a Ni/NiAl2O4 catalyst. Over the palladium-based catalyst, the steam reforming of propene is faster and more selective than steam reforming of propane. Over the Pd catalyst, the steam reforming of propane is likely inhibited by site poisoning. In contrast, over Ni-based catalyst the refo...

Environmental considerations will probably change automobile fuels from gasoline and gas-oil to hydrogen (as fuel cell) in the future. Problems of fossil fuels include producing gaseous pollutants, such as NOx, CO, and even SO2 (from incomplete-hydrotreated fuels), which need catalytic converters and greenhouse gas emission (such as CO2, CH4, N2O) from the exhaust with a drastic effect on globa...

A naphtha catalytic reforming unit with four reactors in series is analyzed. A physical model is proposed to describe the catalytic reforming radial flow reactor. Kinetics and thermodynamics equations are selected to describe the naphtha catalytic reforming reactions characteristics based on idealizing the complex naphtha mixture by representing the paraffin, naphthene, and aromatic groups by s...

With the actual growth of the natural gas industry in the US as well as the potential and availability of this non-renewable carbon source worldwide, reforming of methane gas is getting increasing attention. Methane can be used for the production of heat or electricity, as well, it can be converted to syngas, a building block that could lead to the production of liquid fuels and chemicals, a ve...

As a favorably clean fuel, syngas (synthesis gas) production has been the focus of concern in past decades. Substantial literatures reported the syngas production by various catalytic reforming reactions particularly in methane or ethanol reforming. Among the developed catalysts in these reforming processes, Ni-based catalysts from hydrotalcite-like compounds (HTLcs) precursors have drawn consi...

Glycerol represents an emerging renewable bio-derived feedstock, which could be used as a source for producing hydrogen through steam reforming reaction. In this review, the state-of-the-art about glycerol production processes is reviewed, with particular focus on glycerol reforming reactions and on the main catalysts under development. Furthermore, the use of membrane catalytic reactors instea...

This chapter reviews recent studies of catalytic reforming of logistic fuels at hightemperature. Aside from steam and autothermal reforming, special consideration is given to partial oxidation conditions. Natural gas, gasoline, diesel, and ethanol containing fuels are discussed. Methane and iso-octane as fuel surrogates are exemplarily used to explain the behavior of the reformers in particular...

Fuel flexibility is a significant advantage of solid oxide fuel cells (SOFCs) and can be attributed to their high operating temperature. Here we consider a direct internal reforming solid oxide fuel cell setup in which a separate fuel reformer is not required. We construct a multidimensional, detailed model of a planar solid oxide fuel cell, where mass transport in the fuel channel is modeled u...

Dry reforming of methane for the production of hydrogen and syngas has attracted much attention from both industrial and environmental aspects. The major problem encountered in the application of this process is the rapid deactivation of the catalyst, which is mainly due to coke accumulation and sintering of the catalyst. As an alternative to reduce the coke formation, the combination of CO2 re...

Introduction Hydrogen as a fuel has recently been an important issue due to developments in fuel cell technology. Hydrogen production from sustainable sources, e.g. biomass, is gaining attention for a CO2 neutral energy supply. Recent developments in flash pyrolysis technologies make it possible to convert lignocellulosic biomass efficiently to a bio-oil, which is easier for handling and transp...