steam reforming is one of the most important processes for producing hydrogen from hydrocarbon fuels such as lpg and has attracted much attention due to its high efficiency and economy. in this study, the lpg steam reforming reaction was investigated on nickel catalysts supported on four various zeolites (h-y, na-y, hzsm5 and ferrierite). the catalytic tests were performed in a tubular fixed be...

Experiments of propane and propene steam reforming have been performed over a Pd–Cu/c-Al2O3 catalyst and over a Ni/NiAl2O4 catalyst. Over the palladium-based catalyst, the steam reforming of propene is faster and more selective than steam reforming of propane. Over the Pd catalyst, the steam reforming of propane is likely inhibited by site poisoning. In contrast, over Ni-based catalyst the refo...

A new multicylinder microchamber reactor is designed on autothermal reforming of methane for hydrogen production, and its performance and thermal behavior, that is, based on the reaction mechanism, is numerically investigated by varying the cylinder radius, cylinder spacing, and cylinder layout. The results show that larger cylinder radius can promote reforming reaction; the mass fraction of me...

The CO2 reforming of coke oven gases (COG) was carried out over a Ni/γAl2O3 catalyst in order to obtain a suitable syngas for methanol synthesis. The influence of different operating conditions, such as temperature and volumetric hourly space velocity (VHSV), was studied. It was found that the H2 present in the feed gas promotes the Reverse Water Gas Shift reaction (RWGS), which produces water....

A detailed study on the preparation of bimetallic PtSn/C catalysts using surface-controlled synthesis methods, and on their catalytic performance in the glycerol steam reforming reaction has been carried out. In order to obtain these well-defined bimetallic phases, techniques derived from Surface Organometallic Chemistry on Metals (SOMC/M) were used. The preparation process involved the reactio...

Air-blown gasification of biomass in fluidized bed reactors produces relatively low concentrations of hydrogen. The combination of a catalyst and calcium-based sorbent is being developed to increase the efficiency of converting producer gas from biomass gasification into hydrogen. The conversion process entails reforming the methane and tar, and converting carbon monoxide into hydrogen by the w...

Steam reforming of glycerol to produce syngas or H2-enriched streams is a 12 promising route that has caught the attention of many researchers around the world. This reaction 13 is typically carried out over metal-based catalysts supported on stable materials. Herein we report 14 a study on the effect of Sn on the catalytic properties of Pt/C in the aforementioned reaction. A 15 series of Pt-Sn...

A screening study of the steam reforming reaction on clean and oxygen covered early transitionmetal carbides surfaces is performed by means of density-functional theory calculations. It is found that carbides provide a wide spectrum of reactivities, from too reactive via suitable to too inert. Several molybdenum-based systems are identified as possible steam reforming catalysts. The findings su...

Steam reforming is one of the most important processes for producing hydrogen from hydrocarbon fuels such as LPG and has attracted much attention due to its high efficiency and economy. In this study, the LPG steam reforming reaction was investigated on nickel catalysts supported on four various zeolites (H-Y, Na-Y, HZSM5 and Ferrierite). The catalytic tests were performed in a tubular fixed be...

This work initially focuses on developing a computational fluid dynamics (CFD) model of an industrialscale steam methane reforming reactor (reforming tube) used to produce hydrogen. Subsequently, we design and evaluate three different feedback control schemes to drive the area-weighted average hydrogen mole fraction measured at the reforming tube outlet ( x̄H outlet 2 ) to a desired set-point va...