This work presents an optical non-contact technique to evaluate the fatigue damage state of CFRP structures measuring the irregularity factor of the surface. This factor includes information about surface topology and can be measured easily on field, by techniques such as optical perfilometers. The surface irregularity factor has been correlated with stiffness degradation, which is a well-accep...

─This paper presents the retrofitting of beam-column joint using CFRP (Carbon Fiber Reinforced Polymer) and steel plate. This specimen was tested until failure up to 1.0% drift. This joint suffered severe damages and diagonal cracks at upper crack at upper column before retrofitted. CFRP were wrapped at corbel, bottom and top of the column. Steel plates with bonding were attached to the two bea...

At the moment the huge majority of the structural parts is based on pre-preg designs and standard prepreg manufacturing technology. They are processed conventionally out of Hand Lay-up and cured in autoclaves. The cost drivers are the hand-work, the use of autoclave and the quality control. The future success of new helicopter programs is strongly dependant on the development of cost efficient ...

this paper presents the results of analytical studies concerning the flexuralstrengthening of reinforced concrete beams by external bonding of high-strength lightweightcarbon fiber reinforced plastic (cfrp) plates to tension face of the beam. three groups of beamswere tested analytically and compared with existing experimental results. results of the numericalanalyses showed that, although addi...

This paper presents a data fusion method between the results of ultrasound using phased array at 5MHz frequency and those obtained through eddy current examination at 1-10MH frequency. The obtained results are compared with destructive tests, a very good correlation being obtained. The effects of delamination over the properties of CFRP are studied using dynamic mechanical analyzer, emphasizing...

Carbon fiber reinforced polymers are playing a key role for future aircraft structure design concepts as the newest technical developments for aircraft models B787 and A350 are showing. Due to the specific mechanical properties of this composite material and the novel manufacturing and machining techniques for large-scale CFRP made aircraft structures, it is necessary to establish an adequate p...

SUMMARY Theoretical analyses are made of the influence of the following features on the longitudinal shear and transverse tensile moduli of unidirectional fibre reinforced composites: (i) random variations in positioning of individual fibres, (ii) overall variations leading to fibre bunching, (iii) overall variations leading to interspersed matrix layers, (iv) localised variations resulting in ...

Fibre-reinforced polymer(FRP), also Fibre-reinforced plastic, is a composite material made of a polymer matrix reinforced with fibres. The fibres are usually glass, carbon, or aramid, al‐ though other fibres such as paper or wood or asbestos have been sometimes used. The poly‐ mer is usually an epoxy, vinylester or polyester thermosetting plastic, and phenol formaldehyde resins are still in use...

Most of the laboratory tests investigated the flexural performance of un-preloaded or undamaged RC beams strengthened with CFRP composites. However, in engineering applications, the structural member must carry a certain load or damage. There is a lack of systematical investigations on the effects of preload or damage level on the flexural load-carrying capacity of CFRP-strengthened RC beams. T...

The use of near-surface mounted (NSM) fibre-reinforced polymer (FRP) bars is an interesting method for increasing the shear and flexural strength of existing timber members. This article examines the behaviour of carbon FRP (CFRP) bars in timber under direct pull-out conditions. The objective of this experimental program is to investigate the bond strength between composite bars and timber: bar...