Double-porosity materials were introduced as models for oil and gas reservoirs having both storage and transport porosities, and were at first usually treated as static mechanical systems in order to study the flow patterns of fluids during reservoir pump down. Because fluid withdrawal normally increases the effective stress acting on the reservoir, it also turns out to be important to study th...

Double-porosity materials were introduced as models for oil and gas reservoirs having both storage and transport porosities, and were at first usually treated as static mechanical systems in order to study the flow patterns of fluids during reservoir pump-down. Because fluid withdrawal normally increases the effective stress acting on the reservoir, it also turns out to be important to study th...

One of the mostly used enhanced oil recovery methods is the injection of water or gas under pressure to maintain or reverse the declining pressure in a reservoir. Several parameters should be optimized in a fluid injection process. The usual optimizing methods evaluate several scenarios to find the best solution. Since it is required to run the reservoir simulator hundreds of times, the process...

Intelligent reservoir characterization using seismic attributes and hydraulic flow units has a vital role in the description of oil and gas traps. The predicted model allows an accurate understanding of the reservoir quality, especially at the un-cored well location. This study was conducted in two major steps. In the first step, the survey compared different intelligent techniques to discover ...

We examine the motion of liquid injected into a liquid dominated geothermal reservoir, focusing on the situation in which the injected liquid has different temperature and composition from the reservoir fluid. As a result of these differences, the injected liquid will typically be of different density to the reservoir fluid, and will therefore spread through the reservoir under gravity. Owing t...

Reservoir formations exhibit a wide range of heterogeneity from micro to macro scales. A simulation that involves all of these data is highly time consuming or almost impossible; hence, a new method is needed to meet the computational cost. Moreover, the deformations of the reservoir are important not only to protect the uppermost equipment but also to simulate fluid pattern and petroleum produ...

In mobile hydraulic systems such as commercial vehicles, hydraulic fluids are splashed and agitated in the reservoirs. To overcome air entrainment in oils, the overall dimensions should enclose a sufficient volume of oil to permit air bubbles to escape passively during the resident time of the fluid in the reservoir. However, in view point of environmental compatibility, energy saving, cost sav...

We formulate a hierarchy of models relevant for studying coupled well-reservoir flows. The starting point is an integral equation representing unsteady single-phase 3-D porous media flow and the 1-D isothermal Euler equations representing unsteady well flow. This 2 × 2 system of conservation laws is coupled to the integral equation through natural coupling conditions accounting for the flow bet...