when structures are subjected to strong ground motion excitations, structural elements may be prone to yielding, and consequently experience significant levels of inelastic behavior. the effects of inelastic behavior on the distribution of peak floor loads are not explicitly accounted for in current seismic code procedures. during recent years, many studies have been conducted to develop new de...

When structures are subjected to strong ground motion excitations, structural elements may be prone to yielding, and consequently experience significant levels of inelastic behavior. The effects of inelastic behavior on the distribution of peak floor loads are not explicitly accounted for in current seismic code procedures. During recent years, many studies have been conducted to develop new de...

to increase the safety of structures against strong ground motions and their life due to environmental issues on the earth and saving in terms of materials, it is necessary to expand and upgrade seismic resistant systems. however, more cost-effective systems which have sufficient influence on the seismic performance of structures and also more compatibility with the regional conditions, will be...

Lightweight steel framing is a method in housing and construction that have been widely used in lightweight steel construction. In this method, the structure is built by cold formed steel elements. They are cost-effective, light, and easy to assemble. However, the performance of lateral load resisting systems in cold-formed steel structures specially the behavior of cold-formed steel shear wall...

pullback test has no scrupulous theoretical establishment. it is based on the hypothesis that the response ofthe structure can be related to the response of an equivalent single degree-of-freedom (sdof) system. this implies thatthe response is controlled by a single mode. in fact, the steel frame of each safe room, which is introduced within theunreinforced masonry buildings for protecting the ...

Within the past decade, seismic isolation systems have gained rapid popularity in the earthquake resistant design of bridge structures. This popularity has come in response to the inadequacy of earlier seismic design and retrofit methodologies. The mechanical shortcomings and subsequent failure mechanisms associated with the early elastic seismic design philosophy are first presented, followed ...

Most of the existing seismic design codes are based on the empirical knowledge accumulated through systematic earthquake damage data collection and their analysis. Required levels of protection and seismic design forces gradually are increased after each series of catastrophic earthquakes particularly in developed countries. Many efforts have been made through experimental and analytical studie...

Hexagrid structural system is an innovated system with structural behavior which is similar to a tubular system. In this paper, a numerical study is conducted to estimate the seismic performance of horizontal hexagrid concerning the combined horizontal and vertical hexagrid, tubular and diagrid structural systems. First 30 and 50 story buildings are modeled using ETABS, then pushover and nonlin...

Hybrid moment frame come together with reinforced concrete columns with structural steel beams (RCS). This Composite system provides several key advantages over current steel or concrete moment resisting frame. Past studies have shown this system to be efficient in both design and building stage while able to keep sufficient strength and necessary ductility in seismic zone.Although past researc...

Seismic rehabilitation provides existing buildings with more resistance to seismic activity, ground motion, or geotechnical failure due to earthquakes. Performance-based rehabilitation is a general concept through which the retrofitting criteria are defined regarding to performance objectives when the structural and nonstructural members are subject to different levels of earthquake hazards. In...