This article outlines the ultrasound data employed to calibrate in the laboratory an analytical model that permits the calculation of the depth of partial-depth surface-initiated cracks on bituminous pavements using this non-destructive technique. This initial calibration is required so that the model provides sufficient precision during practical application. The ultrasonic pulse transit times...

The stability of asphalt concrete under the effects of freezing and thawing was studied experimentally, and the experimental test results were modelled using fuzzy logic and statistical methods. The stability was investigated experimentally using the Marshall and ultrasound methods. Asphalt core samples 10 cm in diameter were alternately frozen (–20°C for 16 hr) and thawed (16°C for 8 hr) for 5...

Recycling of asphalt concrete is increasingly used as a major rehabilitation method in Japan because it can conserve natural resources, reduce costs and save energy. In this study, reclaimed asphalt concrete from Tokyo International Airport was evaluated for use in four types of base materials: recycled granular material, recycled cement stabilized material, recycled cement-emulsified asphalt s...

seismic behavior of a rockfill dam with asphalt-concrete core has been studied utilizing numerical models with material parameters determined by laboratory tests. the case study selected for these analyses, is the meyjaran asphalt core dam, recently constructed in northern iran, with 60 m height and 180 m crest length. the numerical analyses have been performed using a nonlinear three dimension...

As a fair deck pavement material of its kind used in steel bridge, the epoxy asphalt concrete is considered much more superior to ordinary asphalt concrete in terms of road performance, while still greatly subject to the level of design and construction. Starting from a practical case of the epoxy asphalt concrete that has been applied in the deck pavement of Pingsheng Steel Bridge, this paper ...

Using nano-technology materials in the asphalt pavement industry is new compared with Portland cement concrete. The main objective of this study is to investigate the effects of nano-silica modification on some properties of a penetration grade asphalt cement and a typical asphalt concrete. 60/70 penetration grade bitumen was modified with different percentages of nano-silica (i.e. 1, 3 and 5%,...

The subject of this paper is an environmental life cycle assessment (LCA) and life cycle cost analysis (LCCA) of processes needed to construct and maintain representative Swiss asphalt, concrete, and composite pavements (including subbase layers) applicable for the Swiss national road network over a period of 75 years. The environmental indicators analyzed are the global warming potential indic...

The use of reclaimed asphalt pavement (RA) in new asphalt pavements can provide important economical savings, while reducing the negative environmental impact. The European research project PARAMIX aims to improve the techniques for hot mix recycling in plant and cold mix in situ recycling, so as to increase the amount of reclaimed asphalt and develop competitive road pavement rehabilitation te...

A significant problem associated with asphalt concrete mixtures is the lack of durability resulting from an inadequate asphalt cement content. Additional asphalt cement added to increase durability results in flushing, bleeding and a significant loss In stability. Fibers have been used in stone matrix asphalt and open-graded friction course pavements successfully throughout Europe to allow high...