In tall buildings the reinforced concrete (RC) shear wall is one of the predominant structural components used to resist lateral loads induced by earthquakes around the world. Previous research demonstrated that shear walls displayed a sudden loss in lateral capacity due to the wall corner and web crushing in the plastic zone. In addition, it was found that large shear distortions in shear wall...

Strong vertical ground motions can significantly alter axial forces in a bridge column. Axial force variations also affect the concrete contribution to the shear capacity of a reinforced concrete (RC) member. However, the effect of axial force demands on shear capacity is a fairly complex issue since the shear demand in an RC bridge column is affected by variations in the axial force. A combine...

The main objective of this study is to propose the Strut-and-Tie method (STM) to predict the shear capacity of simply supported RC deep beams shear-strengthened with carbon fiber reinforced polymers (CFRP). It is assumed that, the total carried shear force by shear-strengthened RC deep beam provided by three independent resistance, namely diagonal concrete strut due to Strut-and-tie mechanism, ...

The result showed that the brittle failure was extinct, and the new-type shear walls had good deformability whose ductility factors were over 4.3. The axial compression ratio had significant influence on the mechanical properties of the new-type shear walls. As the increscent of the axial compression ratio, the shear capacity and initial stiffness were improved, but the energy-dissipating capac...

distinct target of this paper is development of 'implicit discrete element method (dem)' in three dimensions for estimating the ultimate bearing capacity of shallow foundations on layered (non-homogeneous) soils consisting of sand overlying sand or clay overlying sand and vice versa with different shear resisting parameters. in this method, shear resisting parameters and density of ea...

An innovative type called "butterfly-shaped links steel plate shear wall (BLSPSW)" was proposed as a lateral load resisting system. In this novel system, by creating butterfly-shaped links in the four sides of the web plate, the lateral load resisting mechanism is not the development of a diagonal tension field on the web plate (similar to Conventional SPSWs), but the capacity of the system is ...

This paper deals with the modeling of punching shear failure in reinforced concrete slabs using nonlinear finite element analysis. The 3D finite element analyses (FEA) were performed with the appropriate modeling of element size and mesh, and the constitutive modeling of concrete. The FE numerical models are validated by comparing with the experimental results obtained from tested specimens and...