Experimental investigation of the ultimate resistance of slender, steel-plate girder web panels to combined shear-and-patch loading indicates significant interaction between shear loading and patch loading. However, an existing interaction formula is based on experimental results. Herein, an improved design procedure for slender plate girders subjected to combined shear and patch loading is pro...

Timber platform-frame shear walls are characterized by high ductility and diffuse energy dissipation but limited in-plane shear resistance. A novel lightweight constructive system composed of steel columns braced with oriented strand board (OSB) panels was conceived and tested. Preliminary laboratory tests were performed to study the OSB-to-column connections with self-drilling screws. Then, th...

The weakness of existing relationships correlating off-axis modulus of elasticity E� to shear mod­ ulus G12 for wood composite panels is demonstrated through presentation of extensive experimental data. A new relationship is proposed that performs better than existing equations found in the literature. This relationship can be manipulated to calculate the shear modulus G12 of orthotropic specim...

For the lightly-loaded structures (200 lbs/in. in compression and 400 lbs/in. in shear), the traditional skin-stiffened structure is more efficient than sandwich structure due to the minimum gage requirements imposed on the sandwich structure. A design for minimum weight and cost Tstiffened panel that was designed for a 120 lbs/in. compression load and 337 lbs./in. shear loading condition is pr...

Thin perforated Steel Plate Shear (SPS) Walls are among the most common types of energy dissipating systems. The applied holes reduce the shear strength of the plate and allow to decrease the profile size of the members at the boundary of the panel when these systems are used in the typical design of structures. On the other hand, the different fracture locations of these panels are visible whe...

The precast concrete shear wall system is becoming very popular in North America for low, medium, and highrise construction due to the economical advantages possible with the ease and speed of assembly, and the high quality of the precast panels. The connections between panels are extremely important since they affect both the speed of erection and the overall integrity of the structure. This p...

Key elastic properties of full-sized wood composite panels (WCPs) must be accurately determined not only for safety, but also serviceability demands. In this study, the modal parameters of full-sized WCPs supported on four nodes were analyzed for determining the modulus of elasticity (E) in both major and minor axes, as well as the in-plane shear modulus of panels by using a vibration testing m...

The results of an analytical and experimental investigation of 4-ply Kevlar-49-epoxy panels loaded by in-plane shear are presented. Approximately onehalf of the panels are thin-core sandwich panels and the other panels are solid-laminate panels. Selected panels were impacted with an aluminum sphere at a velocity of either 150 or 220 ft/sec. The strength of panels impacted at 150 ft/sec was not ...

URM (Unreinforced Masonry) historic buildings can be generally arranged into three categories: adobe, brick and stone masonry. However, a common feature of URM structures is typically the low mechanical properties of the masonry material, especially in terms of shear strength. URM buildings are not amenable to seismic analysis, and the relatively low strength of stone and brickwork masonry ofte...

The investigation aims at: (i) constructing a modified higher-order shear deformation theory in which Kirchhoff's hypotheses are relaxed, to allow for shear deformations; (ii) validating the present 5-parameter-smeared-laminate theory by comparing the results with exact solutions; and (iii) applying the theory to a specific problem of the postbuckling behavior of a flat stiffened fiber-reinforc...