In this paper, computational fluid dynamics (CFD) is utilized to characterize a prototype biolistic delivery system, the biomedical device based on the contoured-shock-tube design (CST), with the aim at investigating shocks induced flow instabilities within the contoured shock tube. The shock/interface interactions, the growth of perturbation at an interface between two fluids of different dens...

Using a shock tube to generate shock waves, the wave patterns through several bifurcated junctions were studied. The effect of roughness was simulated by introducing grooves on the lower wall of the junctions, while the upper wall had a smooth surface. Five different bifurcation angles were used in the present study: 0, 30, 45, 60, and 90 degrees. The shock tube driver pressure was P4 = 12 bar,...

The aim of this paper is to develop a new two dimensional time accurate Euler solver for shock tube applications. The solver was developed to study the performance of a newly built short-duration hypersonic test facility at Universiti Tenaga Nasional “UNITEN” in Malaysia. The facility has been designed, built, and commissioned for different values of diaphragm pressure ratios in order to get wi...

The interaction between a small twist and a horizontal chromospheric shocktube is investigated. The magnetic flux tube is modeled using 1.5-D magnetohydrodynamics. The presence of a supersonic yet sub-Alfvénic flow along the flux tube allows the Alfvénic pulse driven at the photospheric boundary to become trapped and amplified between the stationary shock front and photosphere. The amplificatio...

Many experiments in biomedical applications and other disciplines use a shock tube. These experiments often involve placing an experimental sample within a fluid-filled container, which is then placed inside the shock tube. The shock tube produces an initial shock that propagates through gas before hitting the container with the sample. In order to gain insight into the shock dynamics that is h...

Shock tubes have been extensively used in the study of blast traumatic brain injury due to increased incidence of blast-induced neurotrauma in Iraq and Afghanistan conflicts. One of the important aspects in these studies is how to best replicate the field conditions in the laboratory which relies on reproducing blast wave profiles. Evolution of the blast wave profiles along the length of the co...

An imploding annular shock wave driven by a jet of air was used to initiate detonations inside a 76 mm diameter tube. The tube was filled with a test gas composed of either stoichiometric ethylene-oxygen or propane-oxygen diluted with nitrogen. The strength of the imploding shock wave and the sensitivity of the test gas were varied in an effort to find the minimum shock strength required for de...

The issue of spontaneous ignition of highly pressurized hydrogen release is of important safety concern, e.g. in the assessment of safety risk and design of safety measures. This paper reports on recent numerical investigation of this phenomenon through releases via a tube using a 5-order WENO scheme. A mixture-averaged multi-component approach was used for accurate calculation of molecular tra...

Experiments were performed to analyze the interaction of an explosively driven shock wave and a propane flame. A 30 g explosive charge was detonated at one end of a 3-m-long, 0.6-m-diameter shock tube to produce a shock wave which propagated into the atmosphere. A propane flame source was positioned at various locations outside of the shock tube to investigate the effect of different strength s...