Solids deform and fluids flow, but soft glassy materials, such as emulsions, foams, suspensions, and pastes, exhibit an intricate mix of solid- and liquid-like behavior. While much progress has been made to understand their elastic (small strain) and flow (infinite strain) properties, such understanding is lacking for the softening and yielding phenomena that connect these asymptotic regimes. H...

Many rubber like materials present a phenomenon known as Mullins effect. It is characterized by a difference of behavior between the first and second loadings and by a permanent set after a first loading. Moreover, this phenomenon induces anisotropy in an intially isotropic material. A new constitutive equation is proposed in this paper. It relies on the decomposition of the macromolecular netw...

The importance of nonlinearities in material constitutive relations has long been appreciated in the continuum mechanics of macroscopic rods. Although the moment (torque) response to bending is almost universally linear for small deflection angles, many rod systems exhibit a high-curvature softening. The signature behavior of these rod systems is a kinking transition in which the bending is loc...

Model physically associating solutions of acrylic triblock copolymer molecules in a midblock-selective solvent displayed non-linear strain-stiffening behavior which transitioned to rapid strain softening during shear start-up experiments at reduced rates spanning almost four orders of magnitude. Softening was believed to result from the shear-induced formation of highly localized regions of def...

In-situ dendrite/metallic glass matrix composites (MGMCs) with a composition of Ti₄₆Zr₂₀V₁₂Cu₅Be₁₇ exhibit ultimate tensile strength of 1510 MPa and fracture strain of about 7.6%. A tensile deformation model is established, based on the five-stage classification: (1) elastic-elastic, (2) elastic-plastic, (3) plastic-plastic (yield platform), (4) plastic-plastic (work hardening), and (5) plastic...

The hot compression tests were carried on X45CrNiW189 valve steel (X45) in the temperature range of 1000– 1200 °C and the strain rate range of 0.004 – 0.5 s-1 in order to study the high temperature softening behavior of this steel. For the exact prediction of flow stress, the effective stress-effective strain curves were obtained from experiments under various conditions. On the basis of experi...

A new plastic hinge integration method overcomes the problems with nonobjective response caused by strain-softening behavior in force-based beam–column finite elements. The integration method uses the common concept of a plastic hinge length in a numerically consistent manner. The method, derived from the Gauss–Radau quadrature rule, integrates deformations over specified plastic hinge lengths ...

in this paper, using numerical methods and test results, the behavior of reinforced concrete beams strengthened with fiber-reinforced polymers (frp) is investigated. in the numerical analysis, the concrete damaged plasticity model is used for considering the nonlinear behavior and strain softening of concrete. the abaqus finite element program is utilized for the analysis of 12 flexural beams s...

Raman scattering of A1g phonons in Bi2Sr2CaCu2O81d single crystals ~d50.13, Tc586 K! has been measured as a function of temperature. We report an anomalous softening in the frequency and a decrease in the linewidth of the A1g phonon at 290 cm 21 ~O1,2 c-axis in-phase vibration! below Tc . We also confirm a smaller anomalous softening in the frequency of the A1g phonon at 465 cm 21 ~O3 c-axis vi...

Recent studies of passive myocardial mechanics have shown that strain softening behavior is present during both inflation of isolated whole rat hearts and shearing of tissue blocks taken from the left ventricular free wall in pigs. Strain softening is typically manifested by a stiffer force-extension relation in the first deformation cycle relative to subsequent cycles and is distinguished from...