Spark-Plasma-Sintering (SPS) compaction experiments of nanostructured titanium carbonitride powders have been performed at 1600°C and 1800°C (sintering time = 1 min). The as-received nanostructured samples have been synthesized by rapid condensation from the gas-phase (high frequency plasma). The sintering results were compared with data obtained by various conventional sintering techniques suc...

Spark plasma sintering (SPS) method, as plasma activated sintering, is a method applicable for rapid sintering of metals and ceramics. Owing to the advantage of rapid heating, the alumina ceramics obtained by SPS have a grain size and density comparable to those of hot pressed ones. The increase of densification rate may be related to some difference in ion transport characteristics. This study...

The current research compares the processing influence of Spark plasma sintering (SPS) over conventional sintering on aluminium alloy AA2219 MWCNT composites. Also investigations on the effect of MWCNT content on the properties of composite are presented and discussed. Though unreinforced matrix processed under SPS showed 24.68% improvement in hardness over conventional, the same could not be r...

Spark plasma sintering (SPS) or pulsed electric current sintering (PECS) is a sintering techni‐ que utilizing uniaxial force and a pulsed (on-off) direct electrical current (DC) under low at‐ mospheric pressure to perform high speed consolidation of the powder. This direct way of heating allows the application of very high heating and cooling rates, enhancing densifica‐ tion over grain growth p...

In this research, the mechanical properties and microstructure of Al-15 wt % TiC composite samples prepared by spark plasma, microwave, and conventional sintering were investigated. The sintering process was performed by the speak plasma sintering (SPS) technique, microwave and conventional furnaces at 400 °C, 600 °C, and 700 °C, respectively. The results showed that sintered samples by SPS hav...

Hydroxyapatite (Ca10(PO4)6(OH)2) (HAp) is a very attractive material for human tissue implantation, beacuse it makes up ~69% of the weight of bone [1]. Unfortunately HAp posses low mechanical properties (strength, fracture toughness), which is a barrier to its applications in load-bearing situations [2]. The mechanical properties of HAp composites, is based on the synthesis of composites and th...

Electrical heating of the graphite die and punch assembly is a unique feature of the spark plasma sintering (SPS) process. The high currents needed to heat the die, despite its low resistance, can produce an electric field across the ceramic specimens that may be enough to induce field assisted sintering. Despite the large number of publications of SPS, the electric field intensity has not been...

High density ceramics of the system Bi1-xLaxFeO3, 0 ≤ x ≤ 0.15, have been prepared starting from nanoparticles obtained by mechanosynthesis. The ceramics have been sintered conventionally at 850oC and by spark plasma sintering (SPS). Sintering conditions have been optimized to obtain single phase ceramics, and the microstructure of the ceramics has been compared. Ceramics prepared conventionall...

This paper describes thermoelectric properties of La-doped SrTiO3 prepared by using a combination of combustion synthesis (CS) with post spark plasma sintering (SPS), on which effects of sintering temperature were mainly examined. In experimental, combustion-synthesized (CSed) samples (Sr1 xLaxTiO3, x 1⁄4 0:08) were spark-plasma-sintered (SPSed) at temperatures from 1513 to 1663K and the thermo...

We find that the electrical and thermal connectivity in multiwalled carbon nanotube buckypaper can be tuned using a spark plasma sintering (SPS) technique. Elevated SPS temperatures promote the formation of inter-tube connections and consequently impact the electrical resistivity, thermoelectric power and thermal conductivity of the buckypaper. In particular, the electrical resistivity as a fun...