the aim of the present study was to investigate the influence of nozzle configurations on spray drift and explain the influences using several atomization characteristics (length of spray sheet, spray angle, velocity distribution of flow field, fluctuation of velocity, and droplet size). nozzles manufactured by one company (lechler gmbh, germany) were tested by spraying local tap water in a win...

this study presents a computational study of mixture formation, flame front movement, combustion process and emission formation at the various spray angles and number holes in a direct injection diesel engine. this work is carried out in a direct injection om355 diesel engine at four and five holes with 130
, 135
and 140
spray angles. the amount of fuel injected per cycle is constant at all s...

Abstract: Mathematical modeling of planing hulls and determination of their characteristics are the most important subjects in hydrodynamic study of planing vessels. In this paper, a new mathematical model has been developed based on pressure distribution. This model has been provided for two different situations: (1) for a situation in which all forces pass through the center of gravity and (2...

INTRODUCTION ABSTRACT Particle depositional studies from nasal sprays are important for efficient drug delivery. The main influences on deposition involve the nasal cavity geometry and the nasal spray device of which its parameters are controlled by the product design. It is known that larger particle sizes (>>10μm) at a flow rate of 333 ml/s impact in the anterior portion of the nose, leaving ...

In many cases, the hydrocyclone control is desirable for efficient separation especially in case of changing feed conditions. Control concept based on exact mathematical models is not satisfactory due to the complexity of the physical process. In this case, fuzzy control is a suitable solution. The data are primarily derived from an optical sensor that monitors the outside view of the free unde...

Abstract Experimental investigations were performed on the hollow-cone spray of viscous liquids in high-pressure gas environment, aiming to obtain fundamental knowledge which was indispensable to survey the applicability of non-conventional new liquid fuels for the gas-turbine power-plant. Test liquid employed were water, diesel fuel, palm methyl ester (PME) and silicone-oil #10. The ambient ga...

The present study is concerned with measuring and simulating soot formation and combustion in turbulent liquid fuel spray flames. Soot concentrations inside the combustor are measured by filter paper technique. The simulation is based on the solution of the fully-coupled conservation equations for turbulent flow, chemical species kinetic modeling, fuel droplet evaporation and combustion and...

the manner of spray the fuel has an important effect on stability and convenient mixture of fuel and oxidizer. swirl injectors because of formation of uniform spray cone and proper distribution of the fuel have been used in many rocket engines at aerospace industries. formation and development of air core in the interior stream of swirl injectors and simulation of them is complicated. double ba...