Introduction The mechanical properties of austenitic stainless steels, including the low cyclic fatigue behavior have been a subject of numerous studies [1-8]. Nitrogen addition, in general, increases the fatigue strength by decreasing the stacking fault energy of austenitic stainless steels [6]. The stacking fault energy has a strong influence on the cross slip difficulty, thus it affects the ...

In the frontier of materials science, understanding of materials has been in multiple scales from macro, micro, to atomic levels. This is attributed to the advanced instrumentations such as SEM, TEM, XPS, XRD, as well as several other spectroscopic and metallographic analyses. Fe-CrNi based austenitic stainless steels have a diverse range of modern applications ranging from biomedical prosthese...

It is well known that inclusions and clusters, which are formed in liquid steel during ladle treatment, have harmful effects on the casting process (clogging problems) as well as on the final mechanical properties of a steel product. Especially, steels deoxidized or alloyed with rare earth metals (REM) are difficult to produce due to the high tendency of REM-oxides to form cluster and clog the ...

We report the results of magnetic measurements on austenitic stainless steels and duplex stainless steels using a magnetic hysteresis scaling technique. Unlike saturation hysteresis loops, this scaling technique, which uses a set of minor hysteresis loops, can be used in low measurement fields. We show that there is a universal scaling power law between minor-loop parameters, which is independe...

A physical model has been developed for simultaneous precipitation reactions in austenitic stainless steels, taking into account interactions between phases. Comparisons against experimental results show satisfying agreement, with the model successfully predicting the existence of transient phases that are often observed, but not predicted in equilibrium calculations. An analysis of σ -phase ki...

Orthodontic stainless-steel appliances are considered to be corrosion resistant, but localized corrosion can occur in the oral cavity. This study was undertaken to evaluate the properties of super stainless steels in orthodontic applications. Accordingly, the metallurgical properties, mechanical properties, corrosion resistance, amount of the released nickel, cytotoxicity, and characteristics o...

An ultra-fine-grained AISI 301LN austenitic stainless steel has been achieved by heavy cold rolling, to induce the formation of martensite, and subsequent annealing at 800 C, 900 C, and 1000 C, from 1 to 100 seconds. The microstructural evolution was analyzed using transmission electron microscopy and the yield strength determined by tension testing. Ultra-fine austenite grains, as small as ~0....

In this study, thermal fatigue properties of 400 series ferritic stainless steels have been evaluated in the temperature ranges of 200-800C and 200-900C. Systematic methods for control of temperatures within the predetermined range and measurement of load applied to specimens as a function of temperature during thermal cycles have been established. Thermal fatigue tests were conducted under ful...

Cold rolling of austenitic stainless steel results in increase of residual stresses, hardness, and tensile strength and dislocation density. We have studied the response of eddy current impedance to austenitic change, hardness and its lift off phase in stainless steels during cold reductions. A series of samples of austenitic stainless steel alloys were cold rolled and found that only percentag...

The aim of this work is to determine the fatigue life of 316L stainless steel. The mechanisms of fatigue of 316L stainless steels were investigated and discussed. The fatigue tests were carried out at constant-amplitude cyclic loading with load ratio R=0.1. Scanning Electron Microscope (SEM) is then used to examine the fracture surface. The results show that the fatigue limit of 316L stainless ...