Induction machines are perhaps the most widely used of all electric motors. They are generally simple to build and rugged, offer reasonable asynchronous performance: a manageable torque-speed curve, stable operation under load, and generally satisfactory efficiency. Because they are so widely used, they are worth understanding. In addition to their current economic importance, induction motors ...

Direct Torque controlled induction motor (DTC-IM) drives use stator resistance of the motor for stator flux estimation. So, stator resistance estimation properly is very important for a stable and effective operation of the induction motor. Stator resistance variations because of changing in temperature make DTC operation difficult mainly at low speed. A method based on artificial neural networ...

In this paper, a novel stator current based Model Reference Adaptive System (MRAS) estimator for speed estimation in the speed-sensorless vector controlled induction motor drives is presented. In the proposed MRAS estimator, measured stator current of the induction motor is considered as a reference model. The estimated stator current is produced in an adjustable model to compare with the measu...

flow in the first two-stage of v 94.2 gas turbine is simulated numerically. in this turbine, the second stator is clocked relative to the first stator to different positions. steady-state analysis was carried out by varying the circumferential relative position of the consecutive stator vanes to study the effects of the clocking on turbine performance. a density based compressible inviscid flow...

in conventional direct torque control (dtc), the stator flux is usually kept constant by controlling the x-axis component of the stator voltage in the stator flux reference frame. the torque is then controlled by the y-axis component of stator voltage. in this scenario, the stator current does not exceed its permissible value. however, in the so-called optimal efficiency mode, the induction mot...

An experimental investigation was carried out to examine the influence of the axial spacing between rotor and stator. The test facility of the Swiss Federal Institute of Technology is made up of an inlet guide vane (IGV), a rotor and a stator. Temperature and aerodynamic measurements determined the characteristics of the compressor stage. Data were acquired over a range of flow coefficients for...

The bacterial flagellar motor rotates driven by an electrochemical ion gradient across the cytoplasmic membrane, either H(+) or Na(+) ions. The motor consists of a rotor ∼50 nm in diameter surrounded by multiple torque-generating ion-conducting stator units. Stator units exchange spontaneously between the motor and a pool in the cytoplasmic membrane on a timescale of minutes, and their stabilit...

Direct torque control (DTC) minimizes the use of machine parameters [1, 2]. Among all methods of torque control in induction motor, direct torque control (DTC) seems to be particularly interesting being independent of machine rotor parameters and requiring no speed or position sensors [3, 4, 5]. In spite of its simplicity, DTC is capable of generating fast torque responses. In DTC the torque an...

Direct Torque controlled induction motor (DTC-IM) drives have been used widely over last few decades. DTC-IM drives use the stator resistance of the motor for stator flux estimation which directly depends on the stator resistance of IM. Proper estimation of the stator resistance is very important because stator resistance varies due to the increase in temperature of the machine during operation...

The unbalanced voltages cause negative effects on the doubly fed induction generator (DFIG) such as torque pulsation and increased stator current. Based on the symmetrical component theory, the torque pulsation is the consequence of the interaction of stator and rotor currents of different sequences. This paper presents a control technique to reduce the effect of unbalanced voltages on the DFIG...