Due to the rapid industrialization taking place globally, the problems generated are acute shortage of construction material and increasing in productivity of wastes. The production and consumption of plastic and the rate at which solid plastic waste (SPW) are created have increased considerably. Plastics constitute 12.3% of total waste produced most of which is from discarded water bottles. Th...

Prefabricated modular housing structures have become a promising alternative to site-built structures with equal or higher engineering quality and durability. Major advantages of this technology are fast and cost-efficient construction, reduced labor requirements, and superior quality control due to factory production. The modular design of these prefabricated structures offers the opportunity ...

Analytical strengths of reinforced concrete beams and columns based on reinforcing steel stress-strain curves with and without a sharp yield plateau and the nonlinear stress-strain behavior of concrete are compared with strengths calculated in accordance with the ACI Building Code to determine the feasibility of using the 0.2% offset method to define the yield strength of reinforcing steel. Com...

The floor beams of steel buildings, cold-formed steel floor joists in particular, often require large web openings, which may affect their shear capacities. A cost effective way to mitigate the detrimental effects of such openings is to weld/fasten reinforcements. A difficulty associated with an experimental investigation to establish suitable reinforcement schemes for openings in shear zone is...

in this study, the effect of cement content on concrete performance in corrosive environments is investigated on concrete mixtures having the same water/cement (w/c) ratio. three w/c ratios (0.40, 0.45 and 0.50) were used and for each w/c ratio three mixtures were prepared with cement contents 350, 400 and 450 kg/m3. the compressive strength, electrical resistivity and chloride diffusivity of t...

in this study, the effect of cement content on concrete performance in corrosive environments is investigated on concrete mixtures having the same water/cement (w/c) ratio. three w/c ratios (0.40, 0.45 and 0.50) were used and for each w/c ratio three mixtures were prepared with cement contents 350, 400 and 450 kg/m3. the compressive strength, electrical resistivity and chloride diffusivity of t...

In this research in-plane shear Behavior of composite steel-concrete shear walls was investigated considering the Effects of steel plates thickness, spaces between shear studs, shape and type of shear studs and existing of minimum reinforcement in wall section. Several finite element models were analyzed and Numerical results of two models were taken under verification with existent experimenta...

Chloride-induced corrosion of carbon steel reinforcement is the main cause of deterioration of reinforced concrete (RC) structures in marine environments. One of the ways to protect RC structures from corrosion is to use corrosion-resistant stainless steel reinforcing bars. However, stainless steel is between six and nine times more expensive than carbon steel. Thus, its use can only be justifi...

The use of Fiber Reinforced Polymer (FRP) reinforcement is a practical alternative to conventional steel rebars in concrete structures subjected to aggressive environments. The solution is attractive for bridge deck and rail applications, as it eliminates corrosion of the steel reinforcement, which is the major instrument of degradation. Due to the peculiar physical and mechanical characteristi...

Corrosion of steel reinforcement in concrete structures and bridges is a major problem facing the departments of transportation worldwide. In the United States, maintenance and replacement costs are measured in billions of dollars. Salt environment in hot climate and the use of deicing salts in cold regions have resulted in steady deterioration of bridge decks due to corrosion. These concerns h...