In this study, the treatment of fly ash and steel making slag in aqueous ammonia chloride has been conducted. These zero-value wastes have distinctively high concentrations of magnesium, calcium and iron. The ammonium chloride has been employed as the leaching reagent to extract MgO out of fly ash and slag, and the dissolved cations in the leachate were subsequently precipitated by carbonation....

The behavior of the slag layer between the oscillating mold wall, the slag rim, the slag/liquid steel interface, and the solidifying steel shell, is of immense importance for the surface quality of continuous-cast steel. A computational model of the meniscus region has been developed, that includes transient heat transfer, multi-phase fluid flow, solidification of the slag, and movement of the ...

Submit Manuscript | http://medcraveonline.com rate of about 125 kg/t of the steel produced which leads to piling of the slag in the plant. This slag is generally recycled in a waste recycling plant (WRP) so as to separate the magnetic and the nonmagnetic portions by means of mechanical crushing and magnetic separation. The magnetic portion is then recycled and used in the primary steel making p...

To get suitable ladle slag which can avoid slag sticking onto the RH immersion tube during RH refining process of IF steel, the effect of composition on melting point and viscosity of RH refining ladle slag was studied by different additives which is based on CaO. The results of melting point and viscosity testing experiments indicates that, the melting point and viscosity of RH refining ladle ...

In the conventional continuous casting of steel, either mold powder or oil can be added to lubricate the mold from sticking to the solidifying steel shell. The mold powder melts to form a molten slag or flux layer, and also acts to protect the molten steel from oxidation, to insulate the molten steel from heat loss, to absorb inclusions from the molten steel, to regulate heat transfer to mold w...

Optical microscopy, total oxygen measurements and slime tests have been conducted to quantify the size distribution and amount of inclusions at various processing steps during basic oxygen furnace (BOF) based steel production at Baosteel. The effects on steel cleanliness of specific operational improvements during steel refining and continuous casting have been investigated. Such improvements t...

Amorphous silica and alumina of metakaolin are used to adjust the bulk composition of black (BSS) and white (WSS) steel slag to prepare alkali-activated (AAS) mortars consolidated at room temperature. The mix-design also includes also the addition of semi-crystalline matrix of river sand to the metakaolin/steel powders. The results showed that high strength of the steel slag/metakaolin mortars ...

A new process route for the valorization of BOF steel slags combining H2 production and CO2 mineral sequestration is investigated at 300°C (HT) under hydrothermal conditions. A BOF steel slag stored several weeks outdoor on the production site was used as starting material. To serve as a reference, room temperature (RT) carbonation of the same BOF steel slag has been monitored with in situ Rama...

Slags are the final solid wastes from the steel industry. Their production from waste and associated materials is a proper implementation of the basic objectives and principles of the waste management. This study aims to investigate the chemical and selected significant geotechnical parameters of steel slag as the alternative materials used in road construction. These investigations are strongl...

The recycling options of spent MgO-C refractories from an electrical arc furnace (EAF) have been evaluated. The economic, quality of spent refractories and products made from it, the ease of implementation of a recycling practice and the interest of steel melt shops were considered. It was decided that the best option of most EAF shops would be to recycle spent MgO-C refractory as a foaming sla...