Radial forging is an open die forging process used for reducing the diameters of shafts, tubes, stepped shafts and axles and also for creating internal profiles such as rifling the gun barrels. The radial forging of tube is usually performed over a mandrel to create an internal profile and/or size the internal diameter. Most of the previous studies conducted on the radial forging process have u...

This paper presents a motion planning approach for some basic part shapes that require 5-axis motion control in a LENS machine. The paper discusses an approach that allows a cladding layer to be deposited on a cylindrical or a semi-spherical part for re-build operations. For cylindrical parts, the deposited layer could take the form of a tube, a spiral, or stepped/tappered tube. The approach a...

This paper presents a parametric study of steel I- beam with stepped flanges by using finite element analysis. Stepped flange beam is used in structures to decrease the negative bending moments near interior supports that causes failure due to buckling. Steps in the cross section can be achieved by adding cover plates to the beam flanges, changing the size of the hot rolled section, or changing...

A fast and automatically controlled frequency-tunable radiofrequency (rf) system is installed in an rf plasma thruster consisting of a stepped-diameter insulator source tube wound by single-turn loop antenna solenoid providing magnetic nozzle, immersed vacuum. The frequency the output power are so as to minimize reflection coefficient maintain net corresponding forward minus reflected powers at...

An experimental study was conducted on a large size stepped spillway model with a moderate slope (26.6o) for a range of discharges between 0.020 and 0.237 m/s. In some experiments, the stepped chute was equipped with uniform steps of 5 and 10 cm heights respectively. In addition several non-uniform configurations with combinations of 5 and 10 cm high steps were investigated. For each configurat...

Although field observations of sudden spillway releases highlighted strong aeration of dam break wave flows, no study investigated these two-phase flow characteristics. New original experiments were conducted down a 24 m long stepped waterways. Dam break wave propagation showed an equivalent flow resistance similar to steady flow conditions (f ~ 0.05). Detailed unsteady air-water flow measureme...

The design floods of several reservoirs were recently re-evaluated and the revised spillway outflow could result in dam overtopping with catastrophic consequences for some embankment structures. Herein a physical study was performed on flat and pooled stepped spillways with a slope typical of embankments (θ = 26.6◦) and four stepped configurations were tested: a stepped spillway with flat horiz...

A chute is characterized by a steep bed slope associated with torrential flow. This chute flow may be either smooth or stepped. The flow conditions in stepped channels are classified as nappe flow, transition flow and skimming flow. In this paper, hydraulic characteristics of flow regimes on the stepped channels are presented systematically under a wide range of discharge, channel slope and ste...

Stepped-tube models with a constriction in the anterior section were used to evaluate the effects that nasal valve passage area and nasal cavity shape have on acoustic rhinometry (AR) measurements. The AR-determined cross-sectional areas beyond a constriction of small passage area were consistently underestimated, and the corresponding area-distance curves showed pronounced oscillations. Also, ...