A common decay scenario in old and new buildings was simulated: the effects on masonry structures of salt efflorescence or subefflorescence produced by the rise of saline solution. Eight different types of masonry wall each made up of a combination of different construction materials (brick, calcarenite and four types of mortar were combined as follows: pure lime mortar, mortar + air entraining...

ABSTRACT This paper presents a non-linear finite element material model for the analysis of the mechanical behavior of multi-leaf masonry, which is quite frequently used in ancient stone masonry buildings. A damage model, previously developed by some of the authors for brittle materials (namely, concrete) was adapted to fit the experimental stress−strain behavior of stone masonry. To this end, ...

Fundación Zain is developing new built heritage assessment protocols. The goal is to objectivize and standardize the analysis and decision process that leads to determining the degree of protection of built heritage in the Basque Country. The ultimate step in this objectivization and standardization effort will be the development of an information and communication technology (ICT) tool for the...

Masonry infill has been widely used as building material due to its cost effectiveness and availability.  The failure of these masonry infill walls during the past earthquakes have underscored the importance of ensuring the safety of the infill walls when it is subjected to lateral loads. In-plane and out of plane failures have been observed in many reinforced concrete framed building with maso...

Natural stone is a durable construction material which has been used through centuries for various types of structures. These structures are exposed to corrosive and degradation factors such as climate change and pollution, natural ageing, earthquake actions, increasing urbanization and even human negligence, potentially exposing them to irreversible structural damage and loss. Considering the ...

Strengthening of un-reinforced masonry (URM) structures to improve its seismic performance is not only well recognized among the research community but also getting attention of practicing engineers around the globe. The estimation of lateral capacity and performance of masonry becomes complex because of heterogeneous nature of its constituent materials and other associated problems. Heterogene...

Masonry in one form or another is used in most areas of the world that are prone to interplate or intraplate earthquakes. Masonry structures constructed from traditionally fired or stone bricks have one characteristic that sets them apart from most other structures. If a masonry building is well constructed, it can last for millenniums. Research in the field of Damage Mechanics has identified t...

Masonry has low cohesive strength and is susceptible to the brittle failure, when subjected to induced tensile stresses. It fails due to lateral tensile stresses even when masonry prisms are tested in uni-axial static compression and the stress-strain curve remains almost linear up to failure. Although masonry normally resists compressive forces, under lateral in-plane cyclic loads some parts o...

Recycled concrete brick (RCB) is manufactured by recycled aggregate processed from discarded concrete blocks arising from the demolishing of existing buildings. This paper presents research on the seismic performance of RCB masonry walls to assess the applicability of RCB for use in rural low-rise constructions. The seismic performance of a masonry wall is closely related to the vertical load a...