in this work dynamic recrystallization behavior of aisi 403 martensitic stainless steel was studied using hot compression tests over temperature range of 900 c -1200 c and strain rate range of 0.001 s-1 - 1 s-1. the obtained flow curves showed that the hot compression behavior of the alloy is controlled by dynamic recrystallization. the flow stress and strain corresponding to the critical, pe...

In this work, dynamic mechanical properties of three high-manganese steels with TRIP/TWIP or fully TWIP characteristics are studied. High strain rate experiments in the range of true strain rates between ~500 and 1800 /s are conducted using a dynamic torsional testing setup. All the three steels show a positive strain rate sensitivity in the intermediate range of strain rates (up to 500 /s). Bu...

Model physically associating solutions of acrylic triblock copolymer molecules in a midblock-selective solvent displayed non-linear strain-stiffening behavior which transitioned to rapid strain softening during shear start-up experiments at reduced rates spanning almost four orders of magnitude. Softening was believed to result from the shear-induced formation of highly localized regions of def...

The hot deformation behavior and microstructural evolution of an Al-Zn-Mg-Cu (7150) alloy was studied during hot compression at various temperatures (300 to 450 °C) and strain rates (0.001 to 10 s-1). A decline ratio map of flow stresses was proposed and divided into five deformation domains, in which the flow stress behavior was correlated with different microstructures and dynamic softening m...

Recent studies of passive myocardial mechanics have shown that strain softening behavior is present during both inflation of isolated whole rat hearts and shearing of tissue blocks taken from the left ventricular free wall in pigs. Strain softening is typically manifested by a stiffer force-extension relation in the first deformation cycle relative to subsequent cycles and is distinguished from...

Elastomeric materials experience stretch-induced softening as evidenced by a pre-stretched material exhibiting a signi1cantly more compliant response than that of the virgin material. In this paper, we propose a fully three-dimensional constitutive model for the observed softening of the stress–strain behavior. The model adopts the Mullins and Tobin concept of an evolution in the underlying har...

A new plastic hinge integration method overcomes the problems with nonobjective response caused by strain-softening behavior in force-based beam–column finite elements. The integration method uses the common concept of a plastic hinge length in a numerically consistent manner. The method, derived from the Gauss–Radau quadrature rule, integrates deformations over specified plastic hinge lengths ...

The effect of intrinsic ripples on the mechanical response of the graphene monolayer is investigated under uniaxial loading using molecular dynamics (MD) simulations with a focus on nonlinear behavior at a small strain. The calculated stress-strain response shows a nonlinear relation through the entire range without constant slopes as a result of the competition between ripple softening and bon...

in this work, dynamic mechanical properties of three high-manganese steels with trip/twip or fully twip characteristics are studied. high strain rate experiments in the range of true strain rates between ~500 and 1800 /s are conducted using a dynamic torsional testing setup. all the three steels show a positive strain rate sensitivity in the intermediate range of strain rates (up to 500 /s). bu...

This paper presents an experimental and numerical study of unidirectional carbon fiber composites with a silicone matrix, loaded transversally to the fibers. The experiments show nonlinear behavior with significant strain softening under cyclic loading. The numerical study uses a plane-strain finite element continuum model of the composite material in which the fiber distribution is based on ex...