نتایج جستجو برای: strength ratio

تعداد نتایج: 693170  

In this study, the concrete-steel bond strength of concrete filled cylindrical steel tubes has been experimentally investigated. 22 short, high strength and normal concrete filled circular steel tubes were tested. Push-out test was carried out as the common method to evaluate the bond carrying capacity. Four different concrete mixes were used in preparing the specimens. The steel tubes were w...

2015
Mohammad Panjehpour Hwa Kian Chai Yen Lei Voo Jose Manuel Garcia Aznar

Deep beams are commonly used in tall buildings, offshore structures, and foundations. According to many codes and standards, strut-and-tie model (STM) is recommended as a rational approach for deep beam analyses. This research focuses on the STM recommended by ACI 318-11 and AASHTO LRFD and uses experimental results to modify the strut effectiveness factor in STM for reinforced concrete (RC) de...

Journal: :international journal of environmental research 0

in the present investigation, for the first time in iran, dewatered sludge waste from air heater washing wastewater treatment of a thermal power plant was subjected to investigation of the cement base stabilization and solidification experiments in order to reduce the mobility of heavy and other hazardous metals as well as increasing the compressive strength of the solidified product for possib...

Journal: Physical Treatments 2015

Purpose: previous studies have suggested that thigh muscle imbalance may be a risk factor for knee injury. The Present study aimed to compare Hamstring-to-Quadriceps (H:Q) Ratio and dynamic stability between the two lower limbs of elderly people. Methods: This was a correlational study and by nonprobability sampling 19 healthy community doweling elderly (age=65.93±3.53 yrs.) p...

Journal: :پژوهش های علوم و فناوری چوب و جنگل 0

this study sougth to the effect of occ pulp fractionation on produced paper strength properties improvement. using a pressure screen, occ pulp was devided to tow distinct fractions of accept ratio (short fibers) and reject ratio (long fibers) in accordance with optimum condition of fractionation based on the previous studies. in the next stage, long fiber stream was refined and recombined with ...

Volume fraction of fibres (A), aspect ratio of fibres (B) and fibres orientation (C) are considered as control factors in the determination of hardness strength, hardness strength of plantain fiber reinforced polyester composites (PFR P). These properties were determined for plantain empty fruit bunch (PEFB) and plantain pseudo stem (PPS). Hardness tests were conducted on the replicated samples...

H. Ghiassian and G. R. Poorebrahim,

Triaxial consolidated drained, unconfined compression, and CBR tests have been conducted in order to study the stress-strain, strength, and volume change characteristics of fine sand specimens reinforced by polymeric fibers made from carpet wastes. The variables are aspect ratio (length/width) and weight percentage of the fibers. The results indicate that the peak strength and total volume chan...

H. Ghiassian and G. R. Poorebrahim,

Triaxial consolidated drained, unconfined compression, and CBR tests have been conducted in order to study the stress-strain, strength, and volume change characteristics of fine sand specimens reinforced by polymeric fibers made from carpet wastes. The variables are aspect ratio (length/width) and weight percentage of the fibers. The results indicate that the peak strength and total volume chan...

F. Golestanifard , A. R. Mirhabibi, M. A. Soleimani, R. Naghizadeh,

Metakaolinite-based geopolymer has been synthesized at about 25 °C from metakaolin which has been calcined in different temperatures (600-900 °C) and different Na2O/SiO2 ratio activator (0.3-1.1). Compressive strength and microstructure of cement pastes after 7-28 days curing at ambient temperature were measured. Compressive strength tests on the samples showed that the sample made with calcine...

ژورنال: مواد پرانرژی 2019

Nowadays solid propellant motors (SRMs) are widely used because of simple structure and reliability. One of the requirements in SRMs is high tensile and bonding strength of liner for integrity of grain structure and neutralizes stresses applying to motor. In this research, effect of curing agent ratio (NCO/OH) in the range of (R=0.9-1.4) on tensile strength of liner and bonding strength of line...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید