In this research, the effects of the rotational speed, feed rate, tool material and lubricants on the tool life and the hole quality are studied in the frictional drilling of the titanium sheets. The friction drilling tests are performed on a CNC milling machine. Furthermore, 5 specimens are selected and their metallurgical structures are studied. The results show thatamong the input parameters...

in magnetic abrasive finishing (maf), abrasive grains as a tool move on surface and can removechip from surface of work piece. in this study al 6061 tube was considered as the work piece andthe effect of finishing parameters such as gap distance between tube and poles, rotational speed oftube, abrasive ration and finishing time on surface roughness was investigated. the mixture offerromagnetic ...

In this research, the effects of parameters include tool rotational and traverse speeds were investigated on heat generation and material flow during friction stir welding of Ti-6Al-4V alloy with computational fluid dynamics (CFD) method. Simulation results showed that with increasing of tool rotational and decreasing tool traverse speed, the more frictional heat generates which causes formatio...

In this research, the effects of parameters include tool rotational and traverse speeds were investigated on heat generation and material flow during friction stir welding of Ti-6Al-4V alloy with computational fluid dynamics (CFD) method. Simulation results showed that with increasing of tool rotational and decreasing tool traverse speed, the more frictional heat generates which causes formatio...

in this study, the effects of linear and rotational speed of the friction stir welding tool was investigated on the heat generation and distribution at surface and inside of workpiece, material flow and geometry of the welding area of poly methyl methacrylate (pmma) workpiece. the commercial cfd fluent 6.4 software was used to simulation of the process with computational fluid dynamic technique...

In this work, incremental sheet forming of a complicated shape is investigated experimentally. Two point incremental forming with negative and positive dies are employed for manufacturing of a complicated shape with positive and negative truncated cones. The material is aluminum alloy 3105 with a thickness of 1 mm. The effects of process parameters such as sequence of positive and negative form...

Friction stir welding is a relatively new solid state joining process, which is suitable for welding similar and dissimilar materials.  The present research work concentrates on the effect of tool rotational speed on the tensile, microstructural properties and microhardness of the friction stir welded joints of different grades of austenitic stainless steel sheets. Four different tool rotationa...

In this paper experimentally, the friction-stir welding of the polypropylene sheets with 40% glass fiber has been investigated. Comparison to other welding methods, the strength of the joint is the most important feature in this process. Many parameters such as tool geometry, rotational speed, linear velocity, and tilt angle are very important as input parameters in this type of welding. Theref...

In this article effects of friction stir welding (FSW) tool rotational and traverse speeds were studied on heat generation and temperature distribution in welding zone of AA1100 aluminum alloy and A441 AISI joint. Computational fluid dynamics method was used to simulate the process with commercial CFD Fluent 6.4 package. To enhance the accuracy of simulation in this Study, the welding line that...

Application of thermoplastic materials has increased dramatically in recent decades due to its recyclability, low density, resistance to chemical changes. The friction stir welding process is one of the new methods of solid state welding, which has recently undergone a significant improvement. In this research, using a new tool Made of plain carbon steel st37 in friction stir welding and low co...