Stress corrosion cracking (SCC) behavior of Ni-free duplex stainless steels containing N and C (Febalance-19Cr-8Mn-0.25C-(0.03, 0.21)N, in wt %) was investigated by using a slow strain rate test (SSRT) in air and aqueous NaCl solution with different tensile directions, including parallel (longitudinal) and perpendicular (transverse) to the rolling direction. It was found that alloying N was eff...

In addition to manufacturing cost and production rates, damage resistance has become a major issue for the composites industry. Three-dimensional (3D) woven composites have superior through-thickness properties compared to two-dimensional (2D) laminates, for example, improved impact damage resistance, high interlaminar fracture toughness and reduced notch sensitivity. The performance of 3D wove...

Advanced composites, particularly high modulus laminates, are often susceptible to transverse impact loading. Major damage introduced due to low velocity impact include matrix cracking, fiber break and delaminations. Such flaws tend to reduce residual strength of the material and may cause catastrophic failure when the material is subjected to higher operating loads [1,2]. Unfortunately, these ...

In this paper, the comparison of cyclic hysteresis behavior between cross-ply C/SiC and SiC/SiC ceramic-matrix composites (CMCs) has been investigated. The interface slip between fibers and the matrix existed in the matrix cracking mode 3 and mode 5, in which matrix cracking and interface debonding occurred in the 0° plies are considered as the major reason for hysteresis loops of cross-ply CMC...

Cold is a central feature of environments at higher latitudes and elevations. Thus, cold-induced taphonomic changes are relevant in many forensic contexts. Fifty-two lamb bone segments were used to assess the impact of cold, freeze-thaw cycles, freeze-drying, and water immersion on microstructural cracking of bone in a series of controlled exposure experiments. For each bone segment, three thin...