in this paper, an ultra low carbon high strength low alloy grade steel was subjected to a two-step forging processand this was followed by different post cooling methods. the highest strength was obtained at a faster coolingrate due to the highly dislocated acicular ferrite structure with the fine precipitation of microalloying carbides andcarbonitrides. at a slow cooling rate, the strength fel...

In this paper, an ultra low carbon High Strength Low Alloy Grade Steel was subjected to a two-step forging process and this was followed by different post cooling methods. The highest strength was obtained at a faster cooling rate due to the highly dislocated acicular ferrite structure with the fine precipitation of microalloying carbides and carbonitrides. At a slow cooling rate, the strength ...

Austenitic stainless steels are extensively used in various applications requiring good corrosion resistance and formability. In the current study, the formation of nano/ ultrafine grained austenitic microstructure in a microalloyed AISI 304L stainless steel was investigated by the advanced thermomechanical process of reversion of strain-induced martensite. For this purpose, samples were subjec...

The trade-off between transformation-induced plasticity (TRIP) strengthening and the intrinsically brittle nature of deformation-induced ??-martensite (DIM) has been a long-standing dilemma in optimizing strength–toughness synergy austenitic steels. This limited their potential use, particularly energy absorption applications. Here, we propose new strategy to minimize negative effect without li...

in the present study, mechanical properties and low cycle fatigue behavior of a solid-solutionized aa6061 aluminum alloy produced by equal channel angular pressing (ecap) process were investigated. the grain refinement after two passes of ecap significantly increased the yield stress and ultimate tensile stress and decreased the ductility of the alloy. however, the improvement of low cycle fati...

Deformation-induced martensitic transformation (DIMT) during quasi-static loading has drawn much attention in recent years since it is considered as one of the key strengthening mechanisms advanced high-strength steels (AHSS). However, systematic investigations on at high strain-rates are scarce due to difficulties experimental designs. In this contribution, interrupted Charpy tests were used s...

A Fe-34.5 wt % Mn-0.04 wt % C ultra-high Mn steel with a fully recrystallised fine-grained structure was produced by cold rolling and subsequent annealing. The steel exhibited excellent cryogenic temperature properties with enhanced work hardening rate, high tensile strength, and high uniform elongation. In order to capture the unique mechanical behaviour, a constitutive model within finite str...

Bronization and carburization of fine-grain superplastic stainless steel is reviewed, and new experimental results for fine grain Ti88.5Al4.5V₃Fe₂Mo₂ are reported. In superplastic duplex stainless steel, the diffusion of carbon and boron is faster than in non-superplastic duplex stainless steel. Further, diffusion is activated by uniaxial compressive stress. Moreover, non-superplastic duplex st...

Nuclear energy provides more than 10% of electrical power internationally, and the increasing engagement of nuclear energy is essential to meet the rapid worldwide increase in energy demand. A paramount challenge in the development of advanced nuclear reactors is the discovery of advanced structural materials that can endure extreme environments, such as severe neutron irradiation damage at hig...