In this paper, a compact ultra-wideband bandpass filter using a back to back Coplanar Waveguide (CPW)-to-microstrip transition structure is proposed. Compared with traditional ultrawideband bandpass filters using hybrid structures, the proposed filter has a sharper selectivity because of two transmission zeros located at the lower and upper edges of the passband, respectively, generated by a mo...

A design method for an ultra-wideband bandpass filter (BPF) with four coupled lines has been developed. For demonstration purposes, 50Ω-matched self-complementary antennas integrated with the ultra-wideband, differential-mode BPF with four coupled lines, a notch filter, and a low-pass filter (LPF) were prepared and tested. An optimized structure for a single-stage, broadside-coupled and edge-co...

A compact ultra-wideband bandpass filter based on a multilayer printed circuit board (MPCB) structure is proposed in this paper. RO4450F prepreg used to bond three RO4350B dielectric substrates with different thicknesses the MPCB structure. The upper surfaces of are respectively provided copper-coated structures patterns. blind holes and defected ground (DGS) added an filter. Two groups loaded ...

A novel ultra wideband band (UWB) bandpass filter is developed using ground plane aperture technique for enhancement of the capacitive coupling in the parallelcoupled microstrip line (PCML). The PCML with two external lines is characterized by an equivalent J-inverter network with its susceptance and the two electrical line lengths.

---------------------------------------------------------------------------------------------------------------------------------------------Abstract: -In this paper, a compact ultra wideband (UWB) bandpass filter (BPF) with a passband covering 4.73 GHz to 10.43GHz with a bandwidth of 5.7 GHz and a fractional bandwidth of 75.2% is proposed. The filter has three transmission poles in the passban...

A novel ultra-wideband (UWB) bandpass filter (BPF) with a fractional bandwidth (FBW) of about % 110 is presented using the hybrid microstrip-defected-ground structure (DGS). The proposed filter was designed using a combination of hybrid microstrip-defected-ground structure lowpass filter (LPF) with typical quarter-wavelength short-circuited stubs highpass filter (HPF), followed by an optimizati...

In this paper, a compact ultra-wideband bandpass filter (UWB-BPF) using pseudo-interdigital stepped-impedance resonators (PIDT-SIRs) is designed and implemented on a commercial printed circuit board (PCB) of RT/Duroid 5880 substrate. The first two resonant modes of the SIR are coupled together and they are applied to create a wide passband. The proposed filter at center frequency f0 of 7.1 GHz ...

This paper presents an experimental verification of ultra-wideband bandpass filter (BPF) for UWB applications and notch filter in order to suppress 5 GHz narrowband service when it coexists with UWB radio system. The BPF consists of a hexagonal shaped multiple mode resonator (MMR) with interdigital coupling at both sides. Notch filter is derived from BPF by introducing four embedded open stubs ...