in this article, commercially pure copper samples were severely deformed by equal channel angular pressing (ecap) up to eight passes at room temperature. the effects of severe plastic deformation on the microstructure, mechanical properties, and electrical conductivity of the copper were investigated. the microstructure evolution was followed by optical microscope and field emission scanning el...

A microstructure consisting of ultrafine grained (UFG) ferrite with average grain size of ~ 0.7 µm and dispersed nano-sized carbides was produced by cold-rolling and tempering of the martensite starting microstructure in a low carbon steel. Subsequently, fine grained dual phase (DP) steel consisting of equiaxed ferrite grains with average size of ~ 5 µm and martensite islands with average size ...

In this article, commercially pure copper samples were severely deformed by equal channel angular pressing (ECAP) up to eight passes at room temperature. The effects of severe plastic deformation on the microstructure, mechanical properties, and electrical conductivity of the copper were investigated. The microstructure evolution was followed by optical microscope and field emission scanning el...

Ultrafine grained sheets were prepared from a twin-roll cast AA8006 aluminium alloy using accumulative roll-bonding process at room temperature. The evolution of microstructure of sheets after three accumulative roll-bonding passes during isochronal annealing with a constant step of 20 °C/20 min was studied by light and electron microscopy. The influence of the resulting microstructure on mecha...

severe plastic deformation (spd) methods were developed for producing of metals and alloys with ultrafine grained (ufg) microstructures having high strength. parallel tabular channel angular pressing (ptcap) as a noble severe plastic deformation (spd) method was used to produce ultrafine grained (ufg) and nanostructured cu-30%zn tubes. in this paper, the effect of ptcap process temperature on t...

in the present study, an ultrafine grained (ufg) 304l stainless steel with the average grain size of 300 nm was produced by a combination of cold rolling and annealing. weldability of the ufg sample was studied by nd: yag laser welding under different welding conditions. taguchi experimental design was used to optimize the effect of frequency, welding time, laser current and laser pulse duratio...

Hexagonal close-packed (hcp) iron carbides play an important role in steel processing and in steel products. The recent discovery of novel ultrafine (2-5 nm) iron carbide (ε'-Fe2+xC) precipitates in TRIP steel sheds a new light on the hcp family of carbides. Here we present a first-principles study on the relative stability, and the electronic, magnetic properties of the ε'-Fe2C phases. Differe...

The development of nano/ultrafine bainitic structure in AISI 52100 steel was the goal of this study. For this purpose,the AISI 52100 the specimens were austenitized at 1050 °C for 60 min followed by low-temperature austemperingtreatment at different temperatures and times. The austempered samples were characterized using field emissionscanning electron microscopy (FESEM), X-ra...

In this study, the effect of slip casting parameters on the ultrafine microstructure and the density of pore-free YAG ceramic was evaluated. A stable, high concentrated aqueous YAG slurry using Dolapix-CE64 as a dispersant was prepared. The effect of dispersant concentration as well as the solid load on the stability and rheological behavior of the slurry was also studied. The optimal dispersan...