Air-coupled ultrasonic techniques are being increasingly used for material characterization, non-destructive evaluation of composite materials using guided waves as well as for distance measurements. Application of those techniques is mainly limited by the big losses of ultrasonic signals due to attenuation and mismatch of the acoustic impedances of ultrasonic transducers and air. One of the wa...

High resolution ultrasonic imaging requires high frequency wide band ultrasonic transducers, which produce short pulses and highly focused beam. However, currently the frequency of ultrasonic transducers is limited to below 100 MHz, mainly because of the challenge in precise control of fabrication parameters. This paper reports the design, fabrication, and characterization of sensitive broadban...

This paper describes the design and construction of two ultrasonic Doppler transducers using Finite Element Analysis for blood flow measurement. These transducers were constructed using as sensing element, commercial 8 MHz PIC255 piezoceramic discs, EPO-TEK 301 and Rexolite 4422 as backing and matching layer materials respectively. The objective of this work was to design and construct two sing...

Some power ultrasonic transducers, such as Tonpilz transducers, require high-power transmitting capability as well as broadband performance. Optimized vibrational modes can achieve these requirements. This work compares the resonant characteristics and the surface vibration modes between a homogeneous piezoelectric ring and a 1-3 piezocomposite ring, both used in power ultrasonic transducers. T...

Abstrac t This paper presents a procedure for wind speed measurement using ultrasonic transducers based on short-time Fourier transform (STFT). The measurement of wind speed was performed by estimating the ultrasonic transit-time (ToF). For this purpose the estimated ToF was used the technique of digital signal processing, based on the STFT. The ultrasonic signal detection was performed by sett...

INTRODUCTION The use of noninvasive, acoustic methods like ultrasonometry is becoming increasingly interesting in the quantitative assessment of fracture healing. A reliable measurement technique has been described using ultrasonic transducers placed across the fracture gap. Ultrasonic image aiming is useful for accurate transducers location, on both sides of the gap. The study was designed to ...

Photoacoustic tomography, also referred to as optoacoustic tomography, employs short laser pulses to generate ultrasonic waves in biological tissues. The reconstructed images can be characterized by the convolution of the structure of samples, the laser pulse and the impulse response of the ultrasonic transducer used for detection. Although the laser-induced ultrasonic waves cover a wide spectr...

In the last decades the field of structural health monitoring and damage detection has been intensively explored. Active vibration technique allows to excite the structure at high frequency vibrations which are sensitive to small damage. Ideal candidates for the generation of high frequency (ultrasonic) signals are piezoelectric PZT transducers, due to their small size, low cost and large bandw...

Broadband ultrasonic pulses and monochromatic ultrasonic waves are visualized in various transparent solids using a photoelastic visualization technique. Application is made to the characterization of the sound field radiated by various ultrasonic transducers operating under various excitation and coupling