نتایج جستجو برای: vanadium alloy
تعداد نتایج: 59600 فیلتر نتایج به سال:
Removable osseointegrated titanium mini-implants were successfully used as anchorage devices in orthodontics. The early load is necessary to simplify the mini-implant methodology, but can lead to failure during osseointegration. The Ti-6Al-4V alloy was used instead of commercially pure Ti due to its superior strength. However, the corrosion resistance is low, allowing for metal ion release. The...
The start of melting as well as the melting range in WC-Co and WC-Ni hardmetals is significantly influenced by the alloy gross carbon content as well as by additives (V, Cr). Both Vanadium and Chromium significantly lower the start of melting but also broaden the melting range, in particular at low carbon content (formation of M6C-phases). As a result, a certain temperature range can be defined...
It has been found that phase separation, i.e., D022 precipitation in the supersaturated L12 matrix to form the L12 þ D022 equilibrium state, stagnates in the Ni3Al0:52V0:48 alloy under a certain thermodynamic condition. This stagnation originates from the suppression of the long-range vanadium diffusion in the L12 matrix, so-called diffusion blocking. Because diffusion blocking is inherent to t...
© 2016 The Author(s). Published by Taylor & Francis on behalf of the Nordic Orthopedic Federation. This is an Open Access article distributed under the terms of the Creative Commons Attribution-Non-Commercial License (https://creativecommons.org/licenses/by-nc/3.0) DOI 10.3109/17453674.2015.1128780 (McGrory et al. 2015, Bishop et al. 2013). No mechanical implant failures (i.e. fractures) have b...
The effect of the vanadium addition on the microstructure, the precipitation behavior, and the mechanical properties of the Al-5.0Cu-0.4Mn alloy has been studied. The as-cast Al-5.0Cu-0.4Mn alloy was produced by squeeze casting and the heat treatment was carried out following the standard T6 treatment. It is shown that, with the addition of V, grain refinement of aluminum occurred. During heat ...
the electrocatalysis of the oxygen reduction reaction (orr) on carbon supportedpt-v (1:1) catalyst in polymer electrolyte fuel cells (pefc) was investigated. atan oxygen pressure of one atm an enhanced electrocatalytic property of pt-v/ccompared with pt/c is revealed. these results indicate the occurrence of adifferent electrocatalytic mechanism for the orr on pt/c and pt-v/c. anincrease of mas...
A breeding blanket design for the tritium production ICF reactor SIRIUS-T is presented. The blanket consists of alternating layers of beryllium multiplier and lithium breeder/coolant with vanadium alloy structure. A tritium breeding ratio of 1.9 can be achieved for the optimum layered configuration with lithium enriched to 90% 6Li. An optimum coolant routing scheme is utilized to achieve adequa...
The present work has as main aim to make a small introduction about the types of steels, specially the ones used in the construction industry. This material is appreciated in construction due to its many advantages as strengths, resistance, adaptability and flexibility in design, durability, recyclability,...; even thou its also has week points like a low resistance to fire, weak against corros...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید