Reciprocating diaphragm micro-pumps are the most common type among indirectly–driven micro-pumps. They operate by reciprocating the diaphragm with associated check valves. This paper addresses the Hydroelastic vibration of circular elastic diaphragm interacting with the incompressible and inviscid liquid inside the cylindrical chamber with a central discharge opening. Taking into account axisym...

One of the major problems in experimental vibration analysis is to determine location of transducers. It is important to place the transducers on locations with largest vibration amplitude and to avoid locations with zero-movement (nodal lines). These locations are best seen from vibration mode shapes. Finite element analysis (FEA) provides numerical values for natural frequencies, which are so...

In the present study, an experimental investigation was performed to characterize the vortex induced vibration (VIV) of a flexible cable in an oncoming shear flow. The VIV tests were conducted in a wind tunnel with a flexible cable model. It was found that, under different oncoming velocity profiles, the cable model behaved in single-mode and multi-mode VIVs. The displacement amplitudes of the ...

The ambient and forced vibration techniques for testing full-scale structures are critically compared. Both methods, based on small level excitation, may be used to determine many mode shapes and frequencies of vibration and the corresponding damping values, with adequate accuracy for most purposes. The two techniques give mutually consistent results. The mode amplitudes determined by ambient a...

This paper reports the design and fabrication of capacitive silicon nanomechanical resonators with the selective vibration of a high-order mode. Fixed-fixed beam capacitive silicon resonators have been successfully produced by the use of electron beam lithography, photolithography, deep reactive ion etching, and anodic bonding methods. All resonators with different vibration modes are designed ...

In this paper a mesh-free model of the functionally graded material (FGM) plate is presented.  The piezoelectric material as a sensor and actuator has been distributed on the top and bottom of the plate, respectively. The formulation of the problem is based on the classical laminated plate theory (CLPT) and the principle of virtual displacements. Moreover, the Particle Swarm optimization (PSO) ...

this paper investigates the lateral vibration of single-layered graphene sheets based on a new theory called doublet mechanics with a length scale parameter. after a brief reviewing of doublet mechanics fundamentals, a sixth order partial differential equation that governs the lateral vibration of single-layered graphene sheets is derived. using doublet mechanics, the relation between natural f...

A deep-sea resonant sandwich linear ultrasonic motor is proposed and designed. We determine the parameter of its structure by finite-element analysis. The piezoelectric actuator adopts compound vibration mode of fifth order bending vibration and second order longitudinal. The mode degeneracy of that is completed. We manufacture the prototype to measure the performance of it. We measure its vibr...

This paper investigates the feasibility of robust adaptive feedforward control for the vibration suppression of a smart flexible beam. The adaptive least mean square (LMS) feedforward control with sliding mode controller is developed. Finite element model of flexible beam is calculated. The developed adaptive control with sliding mode controller design is numerically verified on a flexible beam...

In this paper a variationally consistent trigonometric shear deformation theory is presented for the free vibration of thick isotropic square and rectangular plate. In this displacement based theory, the in-plane displacement field uses sinusoidal function in terms of thickness coordinate to include the shear deformation effect. The cosine function in terms of thickness coordinate is used in tr...