Double-walled TiO2 nanotubes with porous wall morphologies are fabricated by anodization under ultraviolet (UV) irradiation. TiO2 formed by anodization of Ti is activated to generate electrons and holes by UV and the anodization process is influenced by the photo-generated charges. As a consequence, morphologies of the fabricated TiO2 nanotubes can be adjusted by controlling the UV illumination...

The backscattering contribution to the conductivity, irrelevant for metallic single-walled carbon nanotubes, is proved to become much significant for doped semiconducting systems, in agreement with experiments. In the case of multi-walled nanotubes, the intershell coupling is further shown to enhance the contribution of backscattering for ”metallic” double-walled, whereas it remains insignifica...

A novel wavy-walled bioreactor designed to enhance mixing at controlled shear stress levels was used to culture chondrocytes in suspension. Chondrocyte aggregation in suspensions mixed at 30, 50, and 80 rpm was characterized in the wavy-walled bioreactor and compared with that in conventional smooth-walled and baffled-walled spinner flask bioreactors. Aggregation was characterized in terms of t...

in this study, first energy absorption of axial and bending loading is considered. next, thin walled structures under oblique loading are investigated using abaqus computer simulation, where 180 different cases are simulated. simulation results of the thin walled structures under oblique loading were compared with the experimental results of nagel, and good agreement was perceived. simulation r...

We introduce intertube interactions of a cantilevered triple-walled carbon-nanotube (TWCNT) resonators via classical molecular dynamics simulations. The fundamental frequencies of TWCNT resonators were less than those of singleand double-walled carbon nanotubes of a given diameter because of the increasing intertube disturbance. Our results imply that for a nanotube with a given diameter, the f...

We show that the number of concentric graphene cylinders forming a carbon nanotube can be found by squeezing the tube between an atomic force microscope tip and a silicon substrate. The compressed height of a single-walled nanotube (double-walled nanotube) is approximately two (four) times the interlayer spacing of graphite. Measured compression forces are consistent with the predicted bending ...

Molecular dynamics simulation is performed on the buckling behavior of single and multi-walled carbon nanotubes under axial compression. Brenner’s ‘second generation’ empirical potential is used to describe the many-body short range interatomic interactions for singlewalled carbon nanotubes, while the Lennard Jones 12-6 model for van der Waals potential is added for multi-walled carbon nanotube...

We have investigated iodine intercalated carbon nanostructures by extended X-ray absorption fine structure (EXAFS) and Raman spectroscopies. We discuss here the charge transfer and the iodine–carbon interaction as a function of the carbon nanostructures (graphite, multiwalled, double-walled and single walled nanotubes). The results show that iodine is weakly adsorbed on the surface of all multi...

Metal thin-walled members have been widely used in building industry. Usually they are utilized as purlins, girts or ceiling beams. Due to slenderness of thin-walled cross-sections these structural members are prone to stability problems (e.g. flexural buckling, lateral torsional buckling). If buckling is not constructionally prevented their resistance is limited by buckling strength. In practi...

Carbon nanotubes (CNTs) are a novel nanomaterial with wide potential applications; however the adverse effects of CNTs following environmental exposure have recently received significant attention. Herein, we explore the systemic toxicity and potential influence of 0-1000 mg L(-1) the multi-walled CNTs on red spinach. The multi-walled CNTs exposed plants exhibited growth inhibition and cell dea...