In this article, carbon black nanofluids were prepared by dispersing the pretreated carbon black powder into distilled water. The size and morphology of the nanoparticles were explored. The photothermal properties, optical properties, rheological behaviors, and thermal conductivities of the nanofluids were also investigated. The results showed that the nanofluids of high-volume fraction had bet...

Ultrahigh performance cooling is one of the important needs of many industries. However, low thermal conductivity is a primary limitation in developing energy-efficient heat transfer fluids that are required for cooling purposes. Nanofluids are engineered by suspending nanoparticles with average sizes below 100 nm in heat transfer fluids such as water, oil, diesel, ethylene glycol, etc. Innovat...

The distilled water productivity of the single basin solar still is very limited. In this context, the design modification of a single basin solar still has been investigated to improve the solar still performance through increasing the productivity of distilled water. The experimental attempts are made to enhance the solar still productivity by using nanofluids and also by integrating the stil...

Nanofluids are a new class of thermal vectors potentially able to drastically increase the heat transfer properties of base fluids such as water, glycol and oil. Nanoparticles of various materials, size (<100 nm), shapes and concentrations can be added to the base fluid to enhance the transport properties. In particular, the knowledge of thermal conductivity and viscosity is essential to study ...

Nanofluids are colloidal suspensions of nanosized particles in the conventional base fluid such as water, engine oil and ethylene glycol. The nanoparticles include the chemically stable metals, metal oxides and nonmetallic. In the present study, the literature available on the applications of nanofluids in plate heat exchanger have been compiled and reviewed. However, this paper elaborates the ...

A numerical investigation is carried out to investigate the transitional flow behaviour of nanofluids flow in an inclined pipe using both single and multi-phase models. Two different nanofluids are considered, and these are Al2O3–water and TiO2–water nanofluids. Moreover, SST κ − ω transitional model is implemented to study the nanofluids flow in inclined pipe. Gravitational force is also adopt...

An investigation on viscosity was conducted 2 weeks after the Al2O3-water nanofluids having dispersants were prepared at the volume concentration of 1-5%. The shear stress was observed with a non-Newtonian behavior. On further ultrasonic agitation treatment, the nanofluids resumed as a Newtonian fluids. The relative viscosity increases as the volume concentrations increases. At 5% volume concen...

In the recent years, great interest has been devoted to the unique properties of nanofluids. The dispersion process and the nanoparticle suspension stability have been found to be critical points in the development of these new fluids. For this reason, an experimental study on the stability of water-based dispersions containing different nanoparticles, i.e. single wall carbon nanohorns (SWCNHs)...

This paper presents an experimental investigation of convective heat transfer coefficient for nanofluids using spiral pipe heat exchanger. The aim of this study is to investigate experimentally flow and convective heat transfer characteristics of water-based nanofluids flowing through a spiral pipe. The test section consist of spiral pipe with ratio pitch per diameter is 7.0 and mean hydraulic ...

This study numerically investigates heat transfer augmentation using water-based Al₂O₃ and CuO nanofluids flowing in a triangular cross-sectional duct under constant heat flux in laminar flow conditions. The Al₂O₃/water nanofluids with different volume fractions (0.1%, 0.5%, 1%, 1.5%, and 2%) and CuO/water nanofluids with various volume fractions (0.05%, 0.16%, 0.36%, 0.5%, and 0.8%) are employ...