As the turbine industries need to manufacture turbine blades made of martensitic stainless steel AISI 420 with high toughness and wear resistance, local laser hardening has become more and more important. In this research, surface of the samples was initially hardened by high-power pulsed laser beam; then, optimum parameters of hardening were calculated and wear resistance of surface hardened s...

most of the materials used in the industry of aero-engine components generally consist of titaniumalloys. advanced materials, because of their excellent combination of high specific strength, lightweight and general corrosion resistance. in fact, chemical wear resistance of aero-engine alloyprovides a serious challenge for cutting tool material during the machining process. the reductionin cutt...

In this paper, the wear resistance and antifriction of epsilon phase layer and diffusion layer of gas nitrided D2 steel and M2 steel have been studied. The changes m wear mechanism of epsilon phase under the load from 20N to 200N are analysed. When the load is lighter than 100N, it is mainly oxidizing wear on friction surface. The adhesion, peeling off and abrasive wear appear on friction surfa...

conclusions estelite sigma quick composite had wear resistance similar to that of nano- and microfilled composites. estelite flowable composites demonstrated similar wear resistance to that of a posterior composite. results the wear amounts of the composites are as follows in order: estelite sigma quick (1886.9 ± 518.5 μm2), estelite flow quick (2708.9 ± 578.1 μm2), estelite high flow (3206 ± 2...

in this study, in order to investigate the effect of increasing the manganese content on microstructure and mechanical properties of high manganese austenitic steels, three alloys with successive increases in weight percentages of manganese (7.55, 13.1, and 16.5) and carbon (0.8 and 1.2) were cast in the presence of a constant amount of chromium (1.5 wt.%) and silica (0.6 wt.%). the samples exp...

in this research, surface composite layers containing nano sized tib2, al2o3-tib2, zro2 and cnt particles have been fabricated on aluminum alloy substrates by friction stir processing. the effects of different processing variables such as number of passes and strengthening particle distribution, hardness, and wear properties of surface nanocomposite layers have been evaluated by electron micros...

Deep cryogenic heat treatment is assumed as a supplementary heat treatment performed on steels before the final tempering treatment to enhance the wear resistance and hardness of the steels. In this study, the effects of the deep cryogenic heat treatment on the wear behavior and corrosion resistance of the 1.2080 tool steel were studied using the wear testing machine and polarization and impeda...

deep cryogenic heat treatment is assumed as a supplementary heat treatment performed on steels before the finaltempering treatment to enhance the wear resistance and hardness of the steels. in this study, the effects of thedeep cryogenic heat treatment on the wear behavior and corrosion resistance of the 1.2080 tool steel were studiedusing the wear testing machine and polarization and impedance...

The wear resistance of microfilled and conventional composite resins, was examined, using two sizes of abrasive particles for polishing. The mechanical properties of the composite resins were also studied and evaluated in relation to wear. Conventional composites showed much lower wear resistance than the microfilled resins. The amalgam and human enamel abraded with 10ƒÊm SiC particles, had str...