Ill EXECUTIVE SUMMARY IV

This paper explains an integrated method of using genetic algorithm on the experimental data for optimizing the process parameters for height to width ratio and use of artificial neural network techniques for predicting the effects on the four weld bead geometric descriptors (front height, front width, back height and back width) by the five controlling weld process variables (welding speed, wi...

A three-dimensional (3D) finite element (FE) model is applied to predict the temperature evolution in the laser welding of galvanized high-strength steels in a zero-gap lap joint configuration. A rotary Gaussian volumetric heat source model is introduced to simulate the laser energy input. The temperature data measured by thermocouples are used to verify the boundary conditions of the thermal m...

In this paper a novel laser impact spot welding (LISW) method is described, in which a hump was formed on the flyer plate on the intended welding spot location by local pre-forming. When the flyer and base plates were placed together to perform welding, the two plates kept in contact over their entire surfaces except at the hump, where a local air gap was enough to guarantee the impact velocity...

Three mm thick plates of commercial pure copper were welded via friction stir welding method using a floating bobbin tool. The effect of different process variables such as the tool transverse speed and the tool rotation speed were examined in order to create a weld with the desired properties. A defect-free weld was obtained at a rotation speed of 1400 rpm and a transverse speed of 18 mm/min w...

The development and fabrication of fusion reactor components utilize different grades of stainless steel materials and different welding techniques. Major candidates are TIG welding, Laser welding and Electron beam welding and Narrow Gap TIG welding. The weld joints quality evaluation and their mechanical properties are to be analyzed for performance of these developed components. The welded jo...

Gas tungsten arc welding (GTAW) or Tungsten inert gas welding (TIG) is one of the widely used techniques for joining ferrous and non-ferrous metal.Gas tungsten arc welding process,consist of non-consumable tungsten electrode which is used to provide the arc for welding. During the welding cycle a shield of inert gas expels the air from the welding area and prevents oxidation of the electrode, w...

An investigation on bridging larger welding gaps between workpieces occurring in practice due to structural requirements or to defects in weld edge preparation is described. Some characteristic cases from practice where a larger root gap should be bridged or the space between two or three workpieces should be filled with a greater quantity of filler material are described. Submerged-arc welding...

Although friction stir welding (FSW) has made its way to industrial application particularly in the last years, the FSW process, its influences and their strong interactions among themselves are still not thoroughly understood. This lack of understanding mainly arises from the adverse observability of the actual process with phenomena like material flow and deposition, large material deformatio...